What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Bear77]

Should help. Do a few coats. I can't believe the body shop let you go without saying what could happen to the bondo when there's long term exposure to water or moisture.

When you don’t know...


Sent from my iPhone using Tapatalk

 

[Sam Harris]

Have the combustion chambers brought down to around 63cc and run thinner gaskets and you'll regain any TQ lost from the cam. You'll gain power across the board, not just down low. I like 10.5:1 CR as a minimum. Also, while the heads are off, have the bowls blended in. Smoothing the casting in the runners and refining the hump around the valve guide are easy but effective little mods.

If you find a deal on some, get 243 or 799 heads and do all of the above. You'll be starting with a better design and larger intake valve to complement a cam.

If you know for sure you'll be boosting, then disregard raising the CR.

This is great info. Thank you!

 

[05Single]

In other news : Dude on Instagram sold his rare clear tail lights. $20 a ticket with 1500 raffle spots. So basically sold them for $3k lol. But the winner got them for $20 (might have had a couple spots but still these go for 400 all day used) .
Should’ve did that with my clear corners

 

[Doubeleive]

https://www.facebook.com/groups/73212731218/permalink/10157578021086219/

I dont know how else to add a video here.

My Denali is squeakity squeaking all of a sudden. It's been like this for about week.
What is could it be?

brakes like me

 

[Doubeleive]

Got my truck back from body shop that was fixing the holes that were in the roof. Started installing Esky roof rack!

Also pictured are the wheels that I’m looking to get center caps for.

Sent from my iPhone using Tapatalk

usually wheels have the model number stamped on the backside, take a wheel off and write down the numbers off the backside, one set will probably be the size, etc but one should be a model number then maybe google that +wheel and maybe you will get lucky.

 

[Tonyrodz]

In other news : Dude on Instagram sold his rare clear tail lights. $20 a ticket with 1500 raffle spots. So basically sold them for $3k lol. But the winner got them for $20 (might have had a couple spots but still these go for 400 all day used) .
Should’ve did that with my clear cornersView attachment 250881

Ingenuous!!

 

[Bear77]

usually wheels have the model number stamped on the backside, take a wheel off and write down the numbers off the backside, one set will probably be the size, etc but one should be a model number then maybe google that +wheel and maybe you will get lucky.

I’ll take a look tomorrow. Thanks for this great information! Will most likely do it after I go to the post office in the morning and tell them a thing or three about themselves!


Sent from my iPhone using Tapatalk

 

[05Single]

Ingenuous!!

Right , I’m not even mad about it lol

 

[treehan77]

https://www.facebook.com/groups/73212731218/permalink/10157578021086219/

I dont know how else to add a video here.

My Denali is squeakity squeaking all of a sudden. It's been like this for about week.
What is could it be?

Upload it to YouTube, then post the link. I have FB, still can’t see it cause I’m not in that group

 

[Danny3737]

Had to replace the driver side view mirror glass after breaking it backing out of my new garage. Went OEM since it’s got the auto dimming etc. The first one I got was defective and looked like a fun house mirror. The second one was perfect. I can guarantee that won’t happen again.