Spring Orientation?

[David Paul]

So I'm in the process of installing new Balltech lowering springs on my 2004 Tahoe. I've looked and have seen conflicting information. Which way are the springs installed? Tight (closer together) coils to the top or bottom? I'm thinking tighter coil to the bottom so the print "Baelltech" is right side up.
TIA
David

 

[NathanJax]

@NORCAL SS could verify, but I'm almost positive you should be able to read Belltech and the tight coils up top and the longer gap is on the bottom



found this... http://www.tahoeyukonforum.com/threads/can-springs-go-in-upside-down.19216/

 

[David Paul]

Thanks for the quick reply Nathan, I'm going with it