Sound Deadener

[ColoradoPPV]

2015 Tahoe PPV

Interior is out.
Sound deadener going in.

How much of a difference can I expect?
Covering the floors, removed headliner covered ceiling, working on the doors outer skin then door panel.

Kenwood stereo & Focal speakers next.

 

[massivespl]

I deaden every vehicle I ever own. Night and day difference to a audiophile. But to the average person they Prly wouldnt notice a huge difference

 

[hcvone]

I have put different products for sound and heat in my cars, as said above the difference is night and day, having this done on my 19' callaway tahoe right now as they are doing the sound system and radar

 

[91RS]

What products are you using?

 

[massivespl]

What products are you using?

https://www.amazon.com/Noico-deaden...+deadener&qid=1597605878&sr=8-3&tag=hydsma-20

this is what a lot of the car audio community uses. I use it also. It’s nice

 

[ColoradoPPV]

What products are you using?

mostly the Noico 80mil rubber pad
They sell a foam I used on the roof and layers of each in the doors.

peel and seal from Lowe’s as a cheap supplement in areas of the walls and rear door.

the peel and seal could be used for the whole thing and results would be pretty good.

 

[hcvone]

I have used
Kilmat
Dynamat
X-Mat

 

[Tozan]

I used Uxcell it is 394 mil (10mm) thick I used it for sound and heat / cold insulation. It does a great job of keeping the inside temps comfortable even in Nevada and Arizona. It is in all the doors and roof. I may get around to the floor in the future.

I also sealed the roof between the sections.

 

[91RS]

I’ve used Raamaudio Raammat and Ensolite on both of my vehicles but I’ve been wanting to do the roof and floors of both also. I just recent found out about that Uxcell stuff on a sound quality group I’m in and I’m very intrigued especially for some heat reduction because my car gets hot as hell inside in the summer. How much of that stuff did it take to do the roof?

 

[TheAutumnWind]

mostly the Noico 80mil rubber pad
They sell a foam I used on the roof and layers of each in the doors.

peel and seal from Lowe’s as a cheap supplement in areas of the walls and rear door.

the peel and seal could be used for the whole thing and results would be pretty good.

peel and seal really isnt any cheaper. Why not use a product that is made for this?

 

[TheAutumnWind]

I did my RCSB gmt400 with CLD tiles (noico), CCF, and most importantly MLV.

Made a huge difference in road noise, and comfort (definitely helps on hot days) and I still have to get MLV on the doors...