Smoked Headlights/Signals/Corners & Fogs.

[ravingmadman]

Check it out:
Before:

After:

Switch for the fog lights in the upper control panel:

The seller I used doesn't exist on ebay anymore, so I can't give you much in the way of a link to the parts I used. But everything came in one kit.

 

[AtomicHoe094]

no piccss

 

[boble94]

how did you wire the fog lights?
gahh....looks nice dude.

 

[dub02gpgt]

I think i'm looking for the exact same lights you have now! how long have you had them installed? what's your opinion on light output and quality of the actual housings? what bulbs are you using as well?

 

[bowtiefreak]

Looks really good.

 

[ravingmadman]

Thanks!! The fog lights were the $25 black plastic ones from Schuck's. Mounting them in my bumper was the hardest part, because there wasn't anything to screw into. The switch was also from Schuck's, because the switch that came with the light was too 80's for me, and wouldn't fit anyway. The upper console has one screw in the bottom you have to remove, and then it just wiggles out. It actually already has a hole for a switch in it already, it's just covered up. Run a drill bit through it, and you're set. The trim along the A-pillar just pops off. Grab a hold of it, and work a screwdriver behind it. All the wiring hides very nicely.

I'm contemplating a set of off-road lights above the bumper, but it will complicate taking the grill off, and might look stoopid. I want to mount the switch overhead as well, but it will either have to go sideways, or cover part of the labeling. Oh well. Decisions, decisions....

 

[boble94]

i did not know that there was a hole behind the upper console. looks nice.

 

[dub02gpgt]

I think i'm looking for the exact same lights you have now! how long have you had them installed? what's your opinion on light output and quality of the actual housings? what bulbs are you using as well?

 

[Arctic-Rodz]

looks great, i need to upgrade my lights as well.

what kind of bumper is that?

 

[dub02gpgt]

I'm pretty sure he's gotta z71 which has that bumper from the factory. I think I saw them on lmc truck...

 

[haks310]

Not a Z71 bumper.

But yeah, you can pick up that same bumper RMM has at LMC or Stylin'

 

[bluebear15]

I'm pretty sure he's gotta z71 which has that bumper from the factory. I think I saw them on lmc truck...

z71 bumper has larger fogs in the center, not to the sides.

 

[ravingmadman]

I'm pretty sure mine's not a Z71. It's been completely debadged though, and I've been too lazy to look up all the codes in the VIN. Other, more important things to do. The headlight output is about the same as with my really fogged up original lenses. I still need to do the 4-hi, and then do HID's.

I'm thinking about doing a winch bumper, so I'm waffling on whether or not to put my 4" offroad lights on my current bumper, or not. I need to do a rear carrier bumper first though, I guess. Thanks for the kind words, all.

 

[ShotgunShells]

Nice pics!