Show off your interior lighting mods

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Lew Schiller

TYF Newbie
Joined
Feb 12, 2018
Posts
23
Reaction score
5
power is on the mirrors - I replaced the incandescent lamps and they work fine.
Bought Festoon 4410's as prescribed in the
L.E.D. Bulb Conversion/Cross Reference List
sticky.
 

73impala

Full Access Member
Joined
Feb 13, 2012
Posts
542
Reaction score
741
Location
Margate, FL
Did the rear cargo lights as well. Along with change all the other bulbs to led as well.

Started on the rear hatch led lighting. Think I will just end up doing the 4 total. I have 2 pointing down and 2 pointing back. Only had 2 hooked up to a battery to see the light out put.

Two pointing back

40921069072_4f7777e3b4_b.jpg
20180322_221322 by James Pate, on Flickr

Two pointing down

27091999088_db32f6e171_b.jpg
20180322_221343 by James Pate, on Flickr

And out put of only the two on the driver side. (the interior lights were on as well)

40921070102_00d11127c1_b.jpg
20180322_220121 by James Pate, on Flickr

40253765804_864ef3f701_b.jpg
20180322_220143 by James Pate, on Flickr
 

inmypassatlife

Full Access Member
Joined
Feb 21, 2017
Posts
979
Reaction score
672
Well, I finally bit the bullet and ordered a set of interior LED's for my '01....we shall see how long this takes since it seems I am way too busy these days. I know @Galante has waited way too long for me to istall my leather interior and @Tonyrodz is still waiting for my payment

No worries guys I have yet to install my already painted sideskirts since May and my buddy is swapping me all four door panels for his escalade ones he uses to mold off of at his stereo shop and he's been waiting for 2 months lol
 

guidrozb1996

TYF Newbie
Joined
Oct 7, 2018
Posts
24
Reaction score
15
Just wanted to show yall what I put on my lift gate hardest part was running the wire through the wire harness for the lift gate to the cab can get the led strip at your local autozone
6eb2ad2ea347e3eddf880bc408e039c0.jpg


Sent from my SM-G892A using Tapatalk
 
OP
OP
05Single

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,243
Reaction score
11,639
Just wanted to show yall what I put on my lift gate hardest part was running the wire through the wire harness for the lift gate to the cab can get the led strip at your local autozone
6eb2ad2ea347e3eddf880bc408e039c0.jpg


Sent from my SM-G892A using Tapatalk
Nice. Yea that harness doesnt play nice. Just dealt with it the other day running more wires.
 

ridin_low07

Member
Joined
Feb 27, 2016
Posts
71
Reaction score
52
Location
Okc
Only one I've done so far was using the console light off of an escalade in my 02 yukon center console. Ended up replacing the console with an 05 avalanche console so I will be starting over lol.

20191225_225020.jpg
 

Forum statistics

Threads
137,691
Posts
1,989,692
Members
102,690
Latest member
RobK
Back
Top