Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
I bought an Autel AL629 on eBay because I needed something for later models. I have a Snap-On brick that works great but only up to 2006. I've hooked the Autel to my Yukon and Tahoe and it works good and reads live data for all systems. I gave $80 for it, might be better out there but for a cheapo it works good for what I want it to do.
I'm not sure if Torque Pro works with the BlueDriver dongle, but if Torque (free) works with it, buy Torque Pro for $5. After you do that be sure to download the extended PIDs that are free.
Factory is Tech2. Similar for later models also are MDI, VXDIAG. Will reprogram to factory specs. Prices low now, $200-$400.
Cheap bluetooth that will do about 90 percent of scans- under $50. Look under Tech info heading for links.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.