Rough Country 3.5 questions

[yukonguru]

Hey guys I was wondering if anyone is running 275 with this lift trying to see what it looks like before I buy.

Thank you
V/R Keith

 

[cjweb11]

just picturing it in my head, i feel like a 275 might look a lil skinny with that much lift. pics may be hard to find as most people with 3.5"+ lift have wider tires than 275

 

[yukonguru]

new to the hole lift thing just trying to figure out what would work. I have been looking through the fourm everyone is running 18 rims and i have the 20's so I cant get a good size.

 

[cjweb11]

Below is a thread from another member "wondernutz" who has 295/55/20 nitto trail grapplers on a 3" leveling kit (i dont think he had to trim any plastic off the fender liners, depends on wheel specs tho)
http://www.tahoeyukonforum.com/forum/showthread.php?t=19748

and another from one of my favorite nnbs "Ziggy2079". 2.5/1.5" leveling kit with 305/55/20 nitto trails grapplers.
http://www.tahoeyukonforum.com/forum/showthread.php?t=62356

---------- Post added at 04:23 PM ---------- Previous post was at 04:17 PM ----------

post #10 on the thread below shows 305/55/20 on the stock 20" rims w/ 3"/2" level
post #20 has 275/60/20 on the "texas 20s" or whatever they're called w/ 2.5"/1.5" level

http://www.tahoeyukonforum.com/forum/showthread.php?t=63772

 

[yukonguru]

thxs man but if I just did the 2.5/1 with 295 that wouldnt look to bad or rub?

 

[cjweb11]

rub w/ leveling kit, maybe, but most likely just need some very minor plastic trimming, probably not with the 3.5"
if you have 4wd i wouldn't go any bigger than a 2.5" level up front, if you want 3.5" i would go straight to the suspension lift anyway
as far as looks go, that's really your call, my opinion is it would look awesome!