I was putting a new battery in my 2020 Yukon SLT and accidentally touched the wrench to one of the leads coming off the battery distribution block thing and it sparked. Car won't start at all. Any ideas? I've checked some of the relevant fuses and they seem fine.
Replaced Battery - Touched Wrench to battery and it sparked and now won't start
- Thread starter Hickey712
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Checked the main fuse block on top of the battery?
www.tahoeyukonforum.com
Also shown here at around 5:35 or so:
Will look something like this:
New battery will not start....
I just replaced the battery in my 2018 GMC Yukon XL Denali 6.2L. The keyfob door lock/unlock is the only thing that works. It will not start, no interior lights, power running boards do not work, etc. I have checked all of the fuses in the fuse box and they all check good. I am currently at...
www.tahoeyukonforum.com
Also shown here at around 5:35 or so:
Will look something like this:
Last edited:
Similar threads
