Post your lifts.

[liftedtahoe]

what size wheels are those 35s sitting on and do you get rubbing?

Mines on 17s and not much rubbing unless I put it in a pretty good bind while I'm turning!

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Countryboy07]

what size wheels are those 35s sitting on and do you get rubbing?

Those are OEM 17's off an Escalade... As far as rubbing, @liftedtahoe will have to answer that part of the question.

**Beat me to it**

 

[DarkBlueHoe95]

Supreme suspensions lift keys. Passenger side 04 torsion bar on my drivers side. Cranked a good bit on Yukon 17s and low tread Toyo 35s

Does not rub on fender or bumper/valance. Rubs on little metal bracket at full lock. Also rubs on rear shock bolt when rear cycles completely.

My Dark Blue Hoe

 

[Adirk]

Mines on 17s and not much rubbing unless I put it in a pretty good bind while I'm turning!

Sent from my SAMSUNG-SM-N910A using Tapatalk

whats the width on those? im runnin 8 wide and seeing if i can get a 12.5 on them

 

[liftedtahoe]

whats the width on those? im runnin 8 wide and seeing if i can get a 12.5 on them

Mine are 7.5 wide and I'm running 35-12.50s but I'm running 2" wheels spacers to keep it out of the rear trac bars

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Adirk]

Mine are 7.5 wide and I'm running 35-12.50s but I'm running 2" wheels spacers to keep it out of the rear trac bars

Sent from my SAMSUNG-SM-N910A using Tapatalk

so my 8s should be fine, they already have some backspacing, couldnt tell you off the top of my head but the ol tires jut out like 1.5-2in

 

[liftedtahoe]

so my 8s should be fine, they already have some backspacing, couldnt tell you off the top of my head but the ol tires jut out like 1.5-2in

Yea you should be fine then buddy! My mud grapplers have the side lugs or I could have ran my factory offset but you should be alright!

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Adirk]

Yea you should be fine then buddy! My mud grapplers have the side lugs or I could have ran my factory offset but you should be alright!

Sent from my SAMSUNG-SM-N910A using Tapatalk

thanks mate, time to go shopping for 33s

 

[liftedtahoe]

thanks mate, time to go shopping for 33s

Post pics when it's on 33s! Good luck bro

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[hoe]

Need to get new pics but here is the gist

Here is the rear

That's clearance you want to fit 35s!

These are all old pics. Will get some new pics tmrw as the stance was adjusted and changed as well as track width in front.

I have 9" of lift with stock keys. 6" lift with 3" spindles up front. In pics it's way de crunk! To be more like 6".

Currently they are cranked like stock for ride quality. So the front is higher. Going to replace my 1.5 in spacer in the rear with either 2.5 or 3 and crank the keys or put in my lift keys. Riding decrunk is just too soft a ride. Lol

 

[liftedtahoe]

Need to get new pics but here is the gist

Here is the rear

That's clearance you want to fit 35s!

These are all old pics. Will get some new pics tmrw as the stance was adjusted and changed as well as track width in front.

What size lift you got?

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[hoe]

What size lift you got?

Sent from my SAMSUNG-SM-N910A using Tapatalk

6" super lift up front with 3" lift spindles. Pretty much decrunk stock keys all the way out till I lift the rear. Pro comp 4" kit with 1.5" rear spacer. Going to go with a 3" Spacer and level the front to match. So overall it should be set at 7-8" lift when done!

 

[liftedtahoe]

You can fit bigger than 35s under there! Right?

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[liftedtahoe]

Cuz I have 35s on mine and not near that much lift

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[hoe]

Cuz I have 35s on mine and not near that much lift

Sent from my SAMSUNG-SM-N910A using Tapatalk

Yes you can! I just hate the stuffed look. But I'm pretty sure I can fit 37s. I'm sticking with my 35s though for full articulation. I also don't have any body lift so tires can get close to the body with extreme off roading. I have 0 rubbing and have done major triming as well.

 

[liftedtahoe]

Yes you can! I just hate the stuffed look. But I'm pretty sure I can fit 37s. I'm sticking with my 35s though for full articulation. I also don't have any body lift so tires can get close to the body with extreme off roading. I have 0 rubbing and have done major trimingb as well.

Tuechè [emoji106]


Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Antonio Estrada]

What size lift you got?

Sent from my SAMSUNG-SM-N910A using Tapatalk

Hey im looking to lift my denali in the front more i have ready lift 3in torsion keys cranked all the way my front shocks are worn out and since they are finally out i wanna go to 6in lift just up front an thoughts on what i can do or buy to get those 6inches up front ? Id appreciate the response thanks in advance.

 

[Antonio Estrada]

6" super lift up front with 3" lift spindles. Pretty much decrunk stock keys all the way out till I lift the rear. Pro comp 4" kit with 1.5" rear spacer. Going to go with a 3" Spacer and level the front to match. So overall it should be set at 7-8" lift when done!

Hey im looking to lift my denali in the front more i have ready lift 3in torsion keys cranked all the way my front shocks are worn out and since they are finally out i wanna go to 6in lift just up front an thoughts on what i can do or buy to get those 6inches up front ? Id appreciate the response thanks in advance.

 

[liftedtahoe]

Hey im looking to lift my denali in the front more i have ready lift 3in torsion keys cranked all the way my front shocks are worn out and since they are finally out i wanna go to 6in lift just up front an thoughts on what i can do or buy to get those 6inches up front ? Id appreciate the response thanks in advance. View attachment 59735

Awd?

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Antonio Estrada]

Awd?

Sent from my SAMSUNG-SM-N910A using Tapatalk

Yes