**PICS** BlizzardX23's Denali

[BlizzardX23]

After I took out the rear bump stops...this is how low the entire truck sits....
The front is LIFTED as high as it will go via torsion bar crank..the bolt is maxed out..all the way up...so the front end can still go MUCH lower!

I still dont like how much the back end bounces...even after the free travel mod...will helper bags help in ride quality?


lemme know what you guys think about how it turned out.......

 

[Kat Killa]

WAAAAY Better! I wish I still had that much room in my front end.

 

[BlackDenali]

So Jealous.........I hate my 2/3 kit more and more every day!!!!

 

[coopiesb]

+1 2/3 was the worest decision ive made

 

[roadrageror]

Looks VERY sharp!!

 

[BlackDenali]

+1 2/3 was the worest decision ive made

I remember have this conversation with you before you ordered your kit.................Should have listened!!!

When I ordered my kit in '04 McGaughys told me that a 3/5 wasn't possible with AWD so I bought a 2/3..........Big F***ing Mistake!!!!

 

[blueflamed03]

looks great man!

 

[Tahoe03mm]

which kit did you wind up using DJM?

 

[Eagle]

After I took out the rear bump stops...this is how low the entire truck sits....
The front is LIFTED as high as it will go via torsion bar crank..the bolt is maxed out..all the way up...so the front end can still go MUCH lower!

I still dont like how much the back end bounces...even after the free travel mod...will helper bags help in ride quality?


lemme know what you guys think about how it turned out.......

I wish mine could go that low! Sadly I made promises not to dump this one.

 

[BlizzardX23]

hah...thanks alll...Im very pleased with the stance...again, only issue...ride quality in the rear sucks...does anyone with a Denali know there fender to ground measurements at stock height?

 

[Denali22]

love your car looks sick

 

[BlizzardX23]

I had to look up these pics for a friend that wanted to see them...then I started thinking...I wish my truck was that clean still... (that was only a few months ago)

 

[thehoe92]

god I can't wait for the day I get my drop
looks good Chris!!!

 

[Narco]

thats the cleanest ive seen your whip! =)

how is the front that low with the keys all the way tight? what else do you have up front?

 

[BlizzardX23]

thats the cleanest ive seen your whip! =)

Sadly....Thats the last time it was ever that clean ...lol

how is the front that low with the keys all the way tight? what else do you have up front?

2 inch drop spindles, and new torsion keys (cranked ALL the way up for MAXIMUM height)

It should do the same for anyone that has the same set up


I've lowered the front to tuck a little bit of tire tread while sitting still now

 

[Travieso]

Sadly....Thats the last time it was ever that clean ...lol



2 inch drop spindles, and new torsion keys (cranked ALL the way up for MAXIMUM height)

It should do the same for anyone that has the same set up


I've lowered the front to tuck a little bit of tire tread while sitting still now

what kinda after market keys did you go with ?

 

[BlizzardX23]

The ones that came with the Mcgauhys kit...it was all one big Mcgaughys drop kit

 

[fatnlowtahoe504]

that **** looks good bud

 

[jdpromo33]

A question to all the 3/5 droppers

Having spoken to Tim about my forthcoming drop, I'm just curious as to why you would want to sacrifice the ride quality just for an extra inch or 2 of drop?

I agree it looks good but in most cases I've read, everyone seems to say it rides like shit!! Especially as the roads up here in the NE are full of holes everywhere

I want my truck to look good but NOT at the expense of a bad ride. For me, it defeats the whole object of getting a big truck in the first place.

I want a big truck that looks good and drives good too.

I'd be interested in hearing your opinions on this.

Thanks JD

 

[Max]

Wait two weeks and I'll have a full writeup regarding my 5/7 drop. Ultimate goal is to have the lowest awd static drop without sacrificing ride quality. My current drop rides great, just needs to be lower and it's a ***** to do it proper.