W8TVI
Full Access Member
Custom lower signal/driving lights.
So, i have OEM, amber aftermarket and then clear/chrome ones and none of them really felt right to me.
In my mind, if ANZO actually made a pair that matched the headlights, they would look something like this.
So i did research on baking headlights also got some good tips from @05Single and got busy.
What ya cookin for dinner, Pete? Headlights!
![]()
I did mine a little different. The first time i baked them at 220 degrees for 5 minutes. And i couldnt even budge them apart with a kitchen knife. So i threw them back in for another 8 minutes, then shoved the butter knife in at a seam and pulled. It slowly began to release and finally she opened up like a clamshell.
![]()
Did the same for the second one. 220 5 mins, then 220 8 mins and they opened. Here's both sets. (the reflectors i bought at the hardware store. you'll see why soon)
![]()
Prepping the sections i want to paint match to the ANZO flat black.
![]()
To make the amber reflector match, i made a cardboard template, then used that to shape it with the Dremel to fit nice and snug into the shell.
![]()
Taped off the clear chrome corner
![]()
The ANZO's have a dark but flat type of coating. So i decided to use SEM which is great for heat and wear and tear and has no gloss to it. Painted
![]()
starting to make sense now?
![]()
Put them all back together and ran a bead of silicone adhesive all around the seam and let them sit.
Installed...
Pics!
![]()
Here's an angle to show the reflectors line up great with the ANZO's amber
![]()
![]()
With lights on
![]()
![]()
![]()
Overall. for my first bake. And a set of $20 lights. They turned out pretty good. They are the best of all 3 worlds (black, clear and amber) and match the Anzo's much better. Let me know what you think
Very nice.
I've been wanting to get a set of turn signals that come like that from the factory, but just fully chromed, but I can only find them as part of a full light set.
I may have to resort to DIY like you.
I still can't make up my mind if I want the black or the full chrome version of those headlights.
If I get the ones like on your truck, I'm going to have to plastidip the center of my grille so it looks like yours...

