Parts Recommendation

[Run4st]

Hello all. Got a 2004 Yukon Flex fuel 5.3. In the not so distant future I will need to change fuel lines from filter to tank. The filter needs changed but I know the line will not survive it. For this I will need to drop tank. While there might as well replace brake lines. (already done the rotors, caliper, small rubber brake lines and master cyl). Any recommendations for either of these kits? If you know this does not fit or of a better deal please let me know. Any help is appreciated. Thanks.

For brakes I am looking at (it is a hydro JL4):
https://shop.advanceautoparts.com/p/dorman-stainless-steel-complete-pre-formed-brake-line-kit-exact-fit-919-154/11148725-P?source=certona

For fuel I am looking at (CrapAzon says this does not fit but not sure they are right...only reason for Amazon is cause I have a gift card that will offset some of cost):
https://www.amazon.com/Dorman-819-824-Stainless-Compatible-Chevrolet/dp/B0DB3VWYVG/ref=sr_1_3?dib=eyJ2IjoiMSJ9.8M-fHXpCMdN9Vc3PeB06iymZtxwuzCVum94QMvO77xYP-t0jgtrW9G_FxpWIp0M6WN82Mvh2-h55j5tf6Om8MBU07XzbPXip9creSUxB-Y1ShDUl5vZH33MLaQZv3IPYyojfYX4jZzZzDkjY-pic5ZmlWinuNnYzgyIi-IvbDv79o3sbruoXkHOsqreRRRAu1gTP4bp4CJ_rMY36V1ITSgfNtWx8pEV3P0AT9IwLeusmnVAlrvBCRW2GUIqejr_5C47uzDV8Lo3qmLxo9nvwoCmOuSdpdnuyVW1d1rznX3M.HpcYrJ2teToriNg60Z5OEhPVYoUP5QkN6p4MNKayNF0&dib_tag=se&keywords=Dorman+819-824&qid=1747755498&s=automotive&sr=1-3&ufe=app_do:amzn1.fos.5998aa40-ec6f-4947-a68f-cd087fee0848

 

[OBSandaNNBS]

On my OBS I had pretty good luck with the Dorman preformed SS line. I did the whole truck. One line, from master to passenger wheel, was a little off, but I made it work.

Beware the fittings will corrode eventually. They are zinc coated or something which is not stainless.

I've begrudgingly accepted Dorman as a high value aftermarket problem solver. I don't like going aftermarket but dang I never had a problem with their products.