New Year, new stuff for sale

[NoReverseYukon]

I found some more cubbies - large ( 2003 - 2006 ) $12 shipped,


and small ( 2001 - 2002 ) $8 shipped.

It's becoming more difficult lately to find these, and you can see that I'm grabbing all I can, condition be damned.

I also found a Denali cluster with the trans. temp.


It powers up OK, but you see it says " Unknown Driver " before it goes to odometer.
This will cost $50 plus shipping, but please do some research on that unknown driver before deciding. I'd hate to sell something that won't work.


@02Z71Raven I know you were interested, so you get first choice.

Thanks everyone.

 

[Sam Harris]

Are the large cubbies for deleting the rear audio controls? If so, I’d like to get one. Looks like those will fit my ‘03 Yukon?

 

[mattbta]

If you ever grab a gray/black piece from the console - the bit with two cubbies and the two power, I’d be interested if in decent shape. I drilled a hole in my original. Got one for free from a junkyard but it was still pretty roached after cleaning.

 

[Fless]

If you ever grab a gray/black piece from the console - the bit with two cubbies and the two power, I’d be interested if in decent shape. I drilled a hole in my original. Got one for free from a junkyard but it was still pretty roached after cleaning.

Add a pic to your post so we know what you're looking for. I keep a running list of things to look for when I go to the Upull.

 

[mattbta]

Add a pic to your post so we know what you're looking for. I keep a running list of things to look for when I go to the Upull.

GM 15194292

 

[NoReverseYukon]

Are the large cubbies for deleting the rear audio controls? If so, I’d like to get one. Looks like those will fit my ‘03 Yukon?

Yes, that is what these are for. Shoot me a message with your address and I'll get the best one packed up.

 

[NoReverseYukon]

If you ever grab a gray/black piece from the console - the bit with two cubbies and the two power, I’d be interested if in decent shape. I drilled a hole in my original. Got one for free from a junkyard but it was still pretty roached after cleaning.

I'll keep an eye out for any in good/great shape. Just to know what tools to bring along, how is this removed ?

 

[mattbta]

I'll keep an eye out for any in good/great shape. Just to know what tools to bring along, how is this removed ?

No tools. If the dash bezel/trim piece (that goes around the radio and cluster and vents) isn't already removed, pop that loose. Then the piece I'm after pops out, too, by pulling straight back. The harness to either power port pops out after pressing in on a clip.

Appreciate your efforts!

Also - you could make a small fortune by collecting those rubber tabs/pads for the cup holders. Seems every NBS is missing one or more!

And Escalade dials - Lights, HVAC, Upper Console, etc. Highly sought after.

 

[NoReverseYukon]

No tools. If the dash bezel/trim piece (that goes around the radio and cluster and vents) isn't already removed, pop that loose. Then the piece I'm after pops out, too, by pulling straight back. The harness to either power port pops out after pressing in on a clip.

Appreciate your efforts!

Also - you could make a small fortune by collecting those rubber tabs/pads for the cup holders. Seems every NBS is missing one or more!

And Escalade dials - Lights, HVAC, Upper Console, etc. Highly sought after.

What is so special about the Escalade stuff ? They all look functionally similar to Yukons/Tahoes, unless I'm missing something. Is it just aesthetics ?

 

[mattbta]

What is so special about the Escalade stuff ? They all look functionally similar to Yukons/Tahoes, unless I'm missing something. Is it just aesthetics ?

Yeah, just visually a little nicer looking.