LED tails...help

[Hammer450R]

Ok i got it all hooked up and I got the fast blinker.
I have the 2 resistors but im not sure what wires to hook the 2 ends to.

My guess is one to the turn signal wire and the other side to ground?

 

[GalaxyBlackEsky]

crap I cannot remember either.. Maybe Dirk knows or Felix been so long since I did them on my old tails.

 

[Hammer450R]

Now im thinking i need to run them inline on just the blinker wire.

 

[GalaxyBlackEsky]

I think your right with that.

 

[KMeloney]

Go to the V-leds website. They've got a splicing video on there. I can't recall which it is, either, but the video will show you.

Also, note that you can get the fast blinker with a crappy connection under the truck. Make sure your connection from the LEDs' harness to the truck's harness is a good one, or you can get the fast blink from that, too.

 

[THE YETI]

Not inline. Needs to jump from +/- on the same bulb.

 

[Hammer450R]

OK nevermind i had the turn and driving light wire switched. I saw your schematic SuperchargedSS and the light bulb (in my head) turned on