Junk Yard Find!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

96ProCompTahoe

Full Access Member
Joined
Apr 30, 2009
Posts
2,606
Reaction score
11
Location
IN
Finally found one! Set me back a whole $2.98!
IMG_0007.gif


It was laying in the floor of a trashed 97 Tahoe like this:
IMG_0003.gif

It was filled with the nastiest substance I have ever had to clean out of something. It's missing the little rubber tabs that hold the smaller cups, and the four tabs that hold the top and bottom of it together are broken off (realized this after i cleaned it up). I'm confident I can make up some tabs and glue the top and bottom together with some epoxy. couple more pics of it for the ones trying to locate them at the junkyard:
IMG_0004.gif

IMG_0006.gif


Also picked up the truck side of the heated seat harness and a blank plate for the overhead console to get the switches installed in it. all three were FREE!!!
 

TahoeTaz

Full Access Member
Joined
Jun 4, 2010
Posts
117
Reaction score
1
Location
Jersey
Good find! I need to make a trip to the junk yard this spring, maybe I can find some goodies
 

bebop

TYF Newbie
Joined
Oct 8, 2010
Posts
9
Reaction score
0
The tabs on my cup holder broke so I used Krazy Glue. Worked like a champ and holds the super size drinks with no problem. Didn't even have to jimmy up any kind of tab. The glue melted both pieces together and is probably stronger now then it was out of the factory!!
 

darin95yuk

Member
Joined
Feb 21, 2011
Posts
65
Reaction score
0
Damn you!!!!!!

ive been lookin for one of those damn things since the day i got my truck!!!! nice find!!!!
 

dsltrc

Full Access Member
Joined
Nov 1, 2010
Posts
240
Reaction score
0
Location
Virginia Beach, VA
shoot i just wrapped mine with duct tape... havn't had a problem since... and you never see the tape anyways..
 
OP
OP
9

96ProCompTahoe

Full Access Member
Joined
Apr 30, 2009
Posts
2,606
Reaction score
11
Location
IN
shoot i just wrapped mine with duct tape... haven't had a problem since... and you never see the tape anyways..


Mines currently wrapped with electrical tape and is working as is. I'll get around to gluing it together once I have a chance to find some foam rubber to remake the tabs. Smaller bottles and cups don't seem to want to stay standing up as it is.
 

Forum statistics

Threads
137,705
Posts
1,990,113
Members
102,699
Latest member
moto
Back
Top