Installed new HU, remove line out converter?

[gbleezy]

I had a LOC installed a few years ago as I added a mono amp and kept the factory HU with Bose/navi. I just installed a 4200nex w/maestro rr and I'm wanting to connect the RCA's from the amp directly to the head unit so I can control the sub with the HU sub settings. The problem is, I don't know what to do with the LOC. Here's how it's currently setup:

Input to the LOC PAC SOEM-4
Purple = right rear pos input - triggers remote output
Purple/black = right rear neg input
Green = left rear pos input
Green/black = left rear negative input

All of the above 4 wires are tapped into red wire and a green wire under the center console. I noticed if I unplug these wires, the amp shuts off.

Amp RCA's are plugged into the output RCA's on the LOC and the remote turn on wire from the amp is connected to the remote input wire on the LOC.

Can I just take the remote turn on wire and RCA's from the amp and connect them to the HU?

 

[hessdawg]

Yes un plug the loc and run the remot wire to the blue white wire coming form the new deck