So, parts replacement DID fix the problem? Roadtest results and how long or far on the roadtest?
Fuel Composition Sensor (P0178) - SOLVED
- Thread starter RAMurphy
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
@OR VietVet So for reference, prior to replacing I cleared the code several times and would get the code again within driving 2-5 miles after my baby was warmed up. I would get two codes, both P0178, one actual code and then the pending. After the change, I still smell like gasoline, no codes after 5+ miles.
Drive it. Unless you have a fuel leak from you messing up the install. You are still smelling the fuel spill.
Last edited:
OP
OP
LoL - Sorry, no I mean on me.
It would be interesting to see what the ethanol content reads now, especially if you know how much (if any) is in the tank. Maybe fuel trims, too.
OP
OP
A soon as I hook up my cold air intake system to my new TB I plan on running a full diagnostic again.
OP
OP
After a temporary fix to attach my cold air intake I was able to test drive and run a diagnostic run. All looks good.
Similar threads
