since it is bad and now broken, take the harness off and smack it with hammer till it comes out of the slot, no need to try and do it gracefully now, nor pay someone else to do the same thing.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Good idea. I’ll try that.since it is bad and now broken, take the harness off and smack it with hammer till it comes out of the slot, no need to try and do it gracefully now, nor pay someone else to do the same thing.
if you cant fit a hammer up in there just use a chisel or long screw driver or something of that nature if it breaks into pieces in the process no biggie just that much easierGood idea. I’ll try that.
yes according to the factory service manual I referenced it appears soI should hit from front to back right?
Hi, I know this is an old post. How did you get your ratchet in the small space? I'm having a hard time getting it in to remove the torx head.I should hit from front to back right?