Front Differential (or Transfer Case?) surging on hard acceleration

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SaintMiles

TYF Newbie
Joined
Sep 20, 2024
Posts
14
Reaction score
11
Front Differential (or Transfer Case?) loping/bumping/surging on hard acceleration.

2016 Yukon AWD set to "auto"

When set to 2wd, does not do this.

Anyone experience this?
 
Joined
Oct 24, 2024
Posts
71
Reaction score
55
No warning lights on the dash?

If no warning lights, I'd get a scanner hooked up to it that can read live data and watch the wheel speed sensors.
 

jaxscuby

Full Access Member
Joined
Nov 19, 2023
Posts
131
Reaction score
89
Location
Jacksonville, FL
there is a transfer case re-initiation out on the web.

in neutral, foot on brake, turn selector switch all the way to the right and hold for X seconds..google it..
what I recall but not exactly.

and then you could use scan tool to do the same thing.

worth the try..
 
OP
OP
S

SaintMiles

TYF Newbie
Joined
Sep 20, 2024
Posts
14
Reaction score
11
I will ask around for a live reading scanner. Thanks for input
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
21,274
Reaction score
30,204
Location
Treasure Coast, Florida
Front Differential (or Transfer Case?) loping/bumping/surging on hard acceleration.

2016 Yukon AWD set to "auto"

When set to 2wd, does not do this.

Anyone experience this?

Set to Auto on hard acceleration you are very likely engaging the front differential on a hard surface and they don't like this, it's perfectly normal.

Leaving the transfer case in Auto all the time reduces its lifespan.
 

Marky Dissod

Full Access Member
Joined
Mar 3, 2023
Posts
4,078
Reaction score
5,886
Location
(718)-
Front Differential (or Transfer Case?) loping/bumping/surging on hard acceleration.
2016 Yukon AWD set to "auto"
When set to 2wd, does not do this.

Everyone experiences this.
Fixed it for you.
Set to Auto on hard acceleration, you are very likely engaging the front differential on a hard surface,
and they don't like this; it's perfectly normal.
As in, if you do this thing that the front diff AND the transfer case does not like -
leaving it set to 'Auto', as you accelerate hard, on hard surfaces -
you will feel lopes/bumps/surges.
When you don't feel those things anymore, they are failing.
Leaving the transfer case in Auto all the time reduces its lifespan.
Last time I drove to hospital in a mad dash, yea, I set it to 'Auto', despite perfect weather.
Apart from that, you're supposed to leave it in RWD unless the ground is wet or otherwise slippery.
 

Forum statistics

Threads
137,671
Posts
1,989,105
Members
102,675
Latest member
j_jerry79

Latest posts

Back
Top