Just came in from outside looking at my tahoe and trying to figure out where to wire the ign wire for the relay that I have. And I'm extra confused. I have the empty tray. I understand how to do the positive to the other battery and the ground no problem, but I'm still unsure of where to run the ign/acc wire. I opened up the fuse box to look at what I've got going on in there and that just confused me more. Take a look at the following pics.
This is the battery tray ready for a new battery.
Notice in the pic on the left side, the pair of threaded silver screws, one black, one silver. the silver threaded screw, what is it? It's got power when there is no key, so I won't use that for my ign/acc line, but is there something similar somewhere under here?
Hello everyone. I've been lurking in the forums for a while. I've got a 2009 Chevy Tahoe LT. Been doing mods here and there and I'm about to hook up a 2nd battery using a pac200 relay but was wondering which wire any of you may have tapped to get your acc line. I'd like to use a wire on the passenger side if possible. Any pics that clearly show the wire are appreciated.
This is the battery tray ready for a new battery.
Notice in the pic on the left side, the pair of threaded silver screws, one black, one silver. the silver threaded screw, what is it? It's got power when there is no key, so I won't use that for my ign/acc line, but is there something similar somewhere under here?
Hello everyone. I've been lurking in the forums for a while. I've got a 2009 Chevy Tahoe LT. Been doing mods here and there and I'm about to hook up a 2nd battery using a pac200 relay but was wondering which wire any of you may have tapped to get your acc line. I'd like to use a wire on the passenger side if possible. Any pics that clearly show the wire are appreciated.
Last edited:
