Droping my 96

[New England Rider]

Haven't had time to read all the threads cuz been so busy. But want to lower my 96 Tahoe. Not sure if I should do the front with keys, lower control arm or what. Want a 2/2 drop. Any suggestions from anyone?

 

[foreverfalcon40]

Keys in front drop kit in back.

 

[New England Rider]

Can anyone direct me directions on doing it. Never done that type of front end before. I see where the torsion rods fit into the lower control arm but how do you get that all apart. Mine looks pretty rusty so I'll proberly have to use some sort of rust buster and a little heat.

 

[DJTricky]

go about half way back, by your tranny cross member and you will see where the bars and, there are 2 bold(one on each side) and you loosen them, it should be a 19mm, and just an fyi, your gonna want to go get an alignment soon after, or you will eat up your tires.

 

[bowtiefreak]

PB laster is the stuff you need to spray on all the bolts the night before you work on it.