Custom Center Console Build *With PICS*

[BlizzardX23]

Everything is pretty much put together...id is on a hinge, I cut out the cup holders, the power inverter is mounted, the sockets are mounted, I need to wire the inverter....and carpet the console...should be close to finished

 

[oak510_tahoe]

^ nice can't wait to see the finished pics.

 

[BlizzardX23]

Added my air compressor to the console as well

 

[BillBlatt18]

Lookin good blizz, can't wait to see the finished console

 

[BlizzardX23]

Thanks man...Im pulling it out, and I'm removing all the 4AWG and replacing it with 0AWG....I just gotta figure out how to run it through the fire wall...and I have to drill a hole in my middle row floor board to run an airline out...

 

[thehoe92]

thats where I ran my 1/0.. its right under the carpet in front of the drivers seat just look underneath and you'll see where it is

 

[Modded]

If I am thinking right TheHoe92, my 07 has a grommet meant to run factory wires through that area too. The issue is a 0 guage is a bit thick for that area and be sealed.
I say split loom the power wire, run it under the truck and zip tie it away from obstructions. Then drill the hole required to mount this thing (http://www.sonicelectronix.com/item_15904_StreetWires+FB0.html) and run the wire through it.
You can even do it right under that console, it will provide a nice seal.

Nice build BLIZ, if I had captian chairs I would try similar.

 

[camochevy21]

Looking good! Building something yourself makes it that much better!

 

[Narco]

awesome job chris!

 

[nytahoe]

looking go blizz

 

[thehoe92]

thats what the SecondSkin is for haha to seal it up!

 

[Brick]

looks awesome man

 

[02YuNali916]

looks good.. i cant wait to see the finished product!!

 

[LazyAssLou]

Updates? Finished? Are you going to paint the white covers?

 

[My01yuk]

Bro, that shit is looking tight. You do good work and the ideas you have are right on point. Can't wait to see final product.

 

[BlizzardX23]

Damn...havent updated this for a bit...finally got around to carpeting the console...its nice....close in color...not perfect..now Im going to leather wrap the face where the 110 plugs sit...in OE color leather to give it a more stock feel...then I need to build a front console since I ripped my stock one out

 

[BillBlatt18]

what evcer happened with this Chris?

 

[chip]

Looks good! Nice job.