This has been done for a month or so and finally got around to posting the pics. I ordered the Cherry Bomb cat-back system for the yukon believing it was a dual rear exit. Hell their website showed it as such as did the instructions that came with the kit. After I started the install, I realized it is a dual rear corner exit kit. I spoke with Cherry Bomb and they admitted the diagrams where wrong. Their reason for making the kit exit in the corners was the spare tire and trailer hitch. These weren't problems for me because my truck didn't have a spare tire when I bought it and I removed the trailer hitch. I also was having a clearance problem with the drivers side pipe that crosses over the differential due to the drop kit. Cherry bomb was nice enough to send me another passenger side pipe and the metal fab began.
Clearancing the frame
Pipes over axle
Hangers moved inside frame rails
Finished product for now
Once the roll pan is installed the tips will have to be moved in and I'll lose the ugly clamps.
Clearancing the frame
Pipes over axle
Hangers moved inside frame rails
Finished product for now
Once the roll pan is installed the tips will have to be moved in and I'll lose the ugly clamps.
Last edited:
