2022 Wont start after remote start

[R32driver]

Fortunately it is summer, so I won't want to use Remote Start again until November...hope they nail it by then.

This would not sit well with me one bit. It's so nice to remote start on a hot summer day and when you get in the vehicle is nice and cool after the AC has been running

 

[WalleyeMikeIII]

This would not sit well with me one bit. It's so nice to remote start on a hot summer day and when you get in the vehicle is nice and cool after the AC has been running

Summer in MN doesn’t usually result in an extremely hot vehicle…maybe 1-2 weeks in Aug

 

[NYisles1]

Here is the updated bulletin (the dealer i had mine towed to back in January says they didnt know there was an updated bulletin but I found it on the NHTSA site).

 

[Fast_AT4]

This feature is a MUST for me here in FL at days end. Hell, I use it first thing in the AM or anytime out and about walking towards the AT4...maybe best to have a socket set with me.

 

[olyelr]

This feature is a MUST for me here in FL at days end. Hell, I use it first thing in the AM or anytime out and about walking towards the AT4...maybe best to have a socket set with me.

I would definitely not use the feature without a 10mm wrench or socket/ratchet!

 

[SSGUNNER]

Id be pissed if this was a thing on a 21. I use remote start daily with no issues. My brother just got a 22 about a month or 2 but havent asked him if he’s experienced this on his. Dont want to jinx him lol.

 

[WalleyeMikeIII]

Here is the updated bulletin (the dealer i had mine towed to back in January says they didnt know there was an updated bulletin but I found it on the NHTSA site).

Thanks, looks like updating to the latest BCM is the way to go. I'll ask my dealer to do that for me next time I am in the shop.

 

[NYisles1]

Thanks, looks like updating to the latest BCM is the way to go. I'll ask my dealer to do that for me next time I am in the shop.

Have mine scheduled for next Tuesday - will be tough to know if the fix actually works since this seems like a pretty low occurrence problem but it will be nice to have enough confidence to use the remote start again.

 

[AmandaTahoeZ71]

I recently purchased the 2022 Tahoe Z71 and this happened to me yesterday. Shared the crap out of me. Is there a solution yet?

 

[WalleyeMikeIII]

I recently purchased the 2022 Tahoe Z71 and this happened to me yesterday. Shared the crap out of me. Is there a solution yet?

Post #103 has the solution info.

Interim: Wait 20 minutes for vehicle to go to sleep and try to restart OR don't wait, disconnect negative battery terminal, wait 2 minutes, reconnect battery terminal, should be good to start.

 

[Doubeleive]

I recently purchased the 2022 Tahoe Z71 and this happened to me yesterday. Shared the crap out of me. Is there a solution yet?

take it to the dealer and request the latest bcm calibration update be performed.

 

[NYisles1]

Had the BCM update done at the dealer today. Going to start using remote start again and will report back here if any further problem. Hopefully this was the fix that puts this issue behind us.

 

[Kimyd]

Does the Chevrolet headquarters know about this? I want to know if the solution is bcm update

 

[Rojosox]

I am also interested in this BCM update. I am picking up my Z71 this weekend and will inquire if it is completely updated before I leave dealership.

 

[olyelr]

Does the Chevrolet headquarters know about this? I want to know if the solution is bcm update

Dont we all. Most dealers dont even have a fawking clue about it…guessing headquarters dont either.

 

[NaliWagon]

Yes brake lights worked. Tried service mode as per the manual -- all the lights came on but it still wouldnt shift into neutral (or start). Tow guys dragged it onto the flatbed and now i await the dealer. At least it was in my driveway and not on a road trip somewhere!

View attachment 360204

Everything described here just happened to me this evening. Had to leave my ‘22 Denali at the dealership since they were closed when it was dropped off. Hopefully, I can get everything reset in short order. I should also note for those who have yet to experience this - I’ve had my Yukon for 6 mos now, I have approximately 6300 miles on it, and have used my remote start religiously out of habit versus necessity. Guess it was my turn today. Thanks to all who have posted on this issue. Gives me a sense of relief to know it’s not a major issue.

 

[olyelr]

Everything described here just happened to me this evening. Had to leave my ‘22 Denali at the dealership since they were closed when it was dropped off. Hopefully, I can get everything reset in short order. I should also note for those who have yet to experience this - I’ve had my Yukon for 6 mos now, I have approximately 6300 miles on it, and have used my remote start religiously out of habit versus necessity. Guess it was my turn today. Thanks to all who have posted on this issue. Gives me a sense of relief to know it’s not a major issue.

Wow! Need more pics of your ride and specs…love the blacked out chrome against that color!

 

[Karrotjs]

Just read this thread tonight, since I had the exact same problem with my 22 suburban, I've been remote starting my vehicle for the last 11,000 miles, remote started today hopped in pressed the start stop button and engine turned off and would not turn back on. Waited maybe 15 minutes away from the vehicle and came back and it started. I will not be using my remote start anymore but I will be watching this thread for a few months to see if the people who got the BCM update still have any issues. Thank you to everyone who contributed to this thread because it is immensely helpful to know you're not alone with crazy problems like these.

 

[Chad G 1979]

Sorry to be dumb, but do you actually have to push the start button once you get into the vehicle? Since it is a smart vehicle it is running with remote start, it knows youve entered it and it knows the fob is inside as well, shouldnt it know its already in and just need to press the brake and select gear to go? As i dont have mine yet and i havemt seen the owners manual yet i dont know how this works.

 

[Stbentoak]

Sorry to be dumb, but do you actually have to push the start button once you get into the vehicle? Since it is a smart vehicle it is running with remote start, it knows youve entered it and it knows the fob is inside as well, shouldnt it know its already in and just need to press the brake and select gear to go? As i dont have mine yet and i havemt seen the owners manual yet i dont know how this works.

Yes, you do. Everything inside the vehicle is dead till that button is pushed with foot on brake, just like you were starting it from Scratch...