16 Escalade 2/4.5 drop

[gat0r]

looks good
ran on dyno yet?

what boost are you at currently?
id guess 6#s, but not familiar w/ the btr cam

 

[brucebruce45]

Updates, speed engineering longtubes waiting to go in, also waiting on smaller pulley to show up and I’ll be putting all that on. wife also got a 16 Denali

 

[brucebruce45]

looks good
ran on dyno yet?

what boost are you at currently?
id guess 6#s, but not familiar w/ the btr cam

boost was around 5.5 bc of the cam, got a 3.0” pulley coming should put me around 8lbs with the lts

 

[BADRIDES]

I like it but needs a bigger tire

 

[brucebruce45]

I like it but needs a bigger tire

It’d rub in the front but thanks for the opinion

 

[BADRIDES]

It’d rub in the front but thanks for the opinion

Fix that rubbin and get a bigger tire. Too much gap in the back with that tiny tire. Like you said just my opinion but still clean.

 

[lynxnova]

Ride and handling is great. Mine is 4wd

Looks good Bruce white and clean.. did you have any problems with the alignments ?


Sent from my iPhone using Tapatalk

 

[Staggered 02]

That is a good looking Escalade. I like the stance and what you've done to it. I assume the long tube headers are now in? How do you like the performance and sound? Who did your tune?

I went with American Racing Headers, Magnaflow exhaust, not cats and tune. I like the sound and performance. Not supercharrger on this one.

 

[brucebruce45]

That is a good looking Escalade. I like the stance and what you've done to it. I assume the long tube headers are now in? How do you like the performance and sound? Who did your tune?

I went with American Racing Headers, Magnaflow exhaust, not cats and tune. I like the sound and performance. Not supercharrger on this one.

View attachment 247652 View attachment 247654

I went with speed engineering, local guy tuned it, picked up about .2 on 1/4 and a couple of mpgs with the lts and pulley

 

[lynxnova]

put some more drop on the Escalade, I had some 2” strut cups leftover so threw them in and did Norcalss 4.5” kit for the rear.

View attachment 231588 View attachment 231589

Hey Bruce, how hard was it to align the wheels, did you need the camber kit?


Sent from my iPhone using Tapatalk

 

[brucebruce45]

Hey Bruce, how hard was it to align the wheels, did you need the camber kit?


Sent from my iPhone using Tapatalk

Alignment guy had no issues, no camber kit, he did leave mine at -1 for better handling purposes. Stock I think he said they are -.25ish if I remember right he said he wouldn’t be a problem.

 

[Staggered 02]

I went with speed engineering, local guy tuned it, picked up about .2 on 1/4 and a couple of mpgs with the lts and pulley

Speed Engineering. Well done. The Escalade and the Supercharfed 02 were both tuned. What a difference a good tune makes.

 

[lynxnova]

Alignment guy had no issues, no camber kit, he did leave mine at -1 for better handling purposes. Stock I think he said they are -.25ish if I remember right he said he wouldn’t be a problem.

Thank you Bruce.


Sent from my iPhone using Tapatalk

 

[lynxnova]

Put some 285/35s on the stocks and this thing is a blast to drive now

View attachment 232277 View attachment 232278

What’s up Brucebruce45, the esky looking nice[emoji1360]! I’ve noticed you went the strut route. I’m looking to lower my esky another inch up front but I’m missing 2 strut rings. Would you happen to have any rings left over? I would be happy to buy them off you


Sent from my iPhone using Tapatalk

 

[brucebruce45]

Scooped up some 24x9/10 us mags on 295/30

 

[BADRIDES]

Scooped up some 24x9/10 us mags on 295/30

View attachment 254050 View attachment 254051 View attachment 254052

I really like that look

 

[Big Mama]

Looks great. Your 2” drop up front looks a lot lower than mine