- Joined
- May 15, 2021
- Posts
- 546
- Reaction score
- 1,348
Hello All!
I am selling the used pistons, pins, and circlips from the L94 6.2L in my 2013 Escalade ESV. This set of 8 pistons has 175,068 miles on them, and are in good condition. (in my opinion).
The coating on the skirts is worn through, but there are no gouges or scoring.
The crowns have light carbon on them.
The ring lands have some carbon build up.
The oil control rings are not coked and clogged up.
The piston pins all fit snugly in the pin bores of the pistons.
I am not sure how much this fact really matters, but my machinist determined there was only 0.002" taper in the cylinders when he inspected the block. I am assuming that means the pistons were wearing well and evenly.
I honestly don't know if these used pistons have value, that is why I set my price at $100. I am loathe to just throw them away. They might be of use to someone. So I am offering them for sale here.
I replaced these pistons when I overhauled the engine, in this thread: https://www.tahoeyukonforum.com/threads/2013-escalade-esv-dod-full-delete-becoming-rebuild.156091/
The engine ran like a top and pulled like a freight train before the lifter started tapping.
I am including photos below of piston number 3. They are representative of all 8 pistons. However, I can get any additional photos needed if a buyer is interested.
I am representing these used pistons as being in good condition and stand behind them. However, these are used and in 'as-is' condition. No warranty is specified or implied. Unless there is a gross problem, like a piston falls apart in your hand, there are no returns.
I will cheerfully pack these pistons in bubble wrap and a sturdy box then ship them via USPS.
Any takers, let me know! If I am a fool for this, then this ad will rot.
I am selling the used pistons, pins, and circlips from the L94 6.2L in my 2013 Escalade ESV. This set of 8 pistons has 175,068 miles on them, and are in good condition. (in my opinion).
The coating on the skirts is worn through, but there are no gouges or scoring.
The crowns have light carbon on them.
The ring lands have some carbon build up.
The oil control rings are not coked and clogged up.
The piston pins all fit snugly in the pin bores of the pistons.
I am not sure how much this fact really matters, but my machinist determined there was only 0.002" taper in the cylinders when he inspected the block. I am assuming that means the pistons were wearing well and evenly.
I honestly don't know if these used pistons have value, that is why I set my price at $100. I am loathe to just throw them away. They might be of use to someone. So I am offering them for sale here.
I replaced these pistons when I overhauled the engine, in this thread: https://www.tahoeyukonforum.com/threads/2013-escalade-esv-dod-full-delete-becoming-rebuild.156091/
The engine ran like a top and pulled like a freight train before the lifter started tapping.
I am including photos below of piston number 3. They are representative of all 8 pistons. However, I can get any additional photos needed if a buyer is interested.
I am representing these used pistons as being in good condition and stand behind them. However, these are used and in 'as-is' condition. No warranty is specified or implied. Unless there is a gross problem, like a piston falls apart in your hand, there are no returns.
I will cheerfully pack these pistons in bubble wrap and a sturdy box then ship them via USPS.
Any takers, let me know! If I am a fool for this, then this ad will rot.
