07+ Ground Force 3 Inch Rear Drop Spring

[shundal]

sold..

 

[Sierkonblazer]

Did this level out your truck or did it require a front drop as well?

 

[shundal]

i did a 2 inch spindle up front with this 3 inch spring out back and the back sat about an inch higher than the front.

I do have the rear measurements on my home computer and can check those this weekend.

 

[ghost]

can you post of pic of these coils? do they have any dead coils?

 

[shundal]

Heres a pic of the springs. They measure 15 1/4 inches.

[/URL][/IMG]

 

[shundal]

bumpppp

 

[Goldelks]

Anyone figure out if this would level the truck or make the back sit to low with a stock front end

 

[shundal]

On my 2007 2wd the rear with these springs sat about 35 1/4 from ground to fender lip with 305/35/24. My front with a 2 inch drops sits at 34 1/4, so it should get pretty close to level with the front stock height. Unfortunately i never tried the setup with the front at the stock height.

 

[Goldelks]

Wonder how much running 285/45/22 would throw off the measurements?

 

[shundal]

a 305/35/24 tire is 32.4" tall and a 285/45/22 is 32.2" tall. So the 285 is .2" shorter.

---------- Post added at 02:13 PM ---------- Previous post was at 02:10 PM ----------

a 305/35/24 tire is 32.4" tall and a 285/45/22 is 32.2" tall. So the 285 is .2" shorter.

a one inch spacer would probably be needed to sit perfectly level with the front, which run around $40 shipped.