02 Tahoe cruise control cable retainer c clip

[Livebai8]

Yep...i lost this sucker when I removed my intake and throttle body and replaced my shock sensors.

Any idea what size c clip I need to replace and lock the retainer bacl onto the throttle body?

02 TAHOE LS 4X4
5.3l FLEX FUEL
285/70/17 W/Z71 RIMS


Sent from my SAMSUNG NOTE 5 using Tapatalk

 

[Livebai8]

Yep...i lost this sucker when I removed my intake and throttle body and replaced my shock sensors.

Any idea what size c clip I need to replace and lock the retainer bacl onto the throttle body?

02 TAHOE LS 4X4
5.3l FLEX FUEL
285/70/17 W/Z71 RIMS


Sent from my SAMSUNG NOTE 5 using Tapatalk

Anyone?

02 TAHOE LS 4X4
5.3l FLEX FUEL
285/70/17 W/Z71 RIMS


Sent from my SAMSUNG NOTE 5 using Tapatalk

 

[915_Tahoe]

The c-clip is not serviceable, comes with the retainer pictured.

GM#12479921 $12.00

 

[S33k3r]

If you don't get an answer here, you might check one of the build threads to see if anyone has made any changes in this area. Likely they'll have the specialized knowledge you are seeking. On the flip side, have you tried any of your local boneyards?

 

[Livebai8]

The c-clip is not serviceable, comes with the retainer pictured.

GM#12479921 $12.00

Oh ok. How exactly do you take it off to replace it?

I don think I’ve ever seen it done except for a video where i saw another person pop it out of there on a s10 pick up. I thought maybe there were all held on the same way??


Sent from my iPad using Tapatalk

 

[taylorb71]

What I did was cut the end off, slide a stock style one on the wire and put on a throttle cable stop. I used what I had. The retainer I had didn't have the slot to put the cable up in just a hole going through the middle.

 

[Tonyv__]

Junk yard was the only place I found 1 for myself