-
-
Alex_M replied to the thread What did you do to your NBS GMT800 Tahoe/Yukon Today?.Cut the hard line near the intake manifold, leave about 1" of hard line. Get a foot of vacuum hose that will snugly fit over the... -
Saw this earlier today.
-
Alex_M replied to the thread Sealing up worn 5.3l leading to oil burning?.Do you know what years that is the case for? My '99 and '00 do not have a PCV valve, but my '02 does. I assumed it was a change that...
-
Alex_M reacted to Fless's post in the thread Sealing up worn 5.3l leading to oil burning? with
Like.
Your '06 Suburban likely has no physical PCV valve; it's just a baffle built into the driver's side valve cover. Install a catch can... -
Alex_M replied to the thread Sealing up worn 5.3l leading to oil burning?.Sealing up oil leaks will not cause you to burn oil unless there is an issue with the PVC system allowing too much crankcase pressure to...
-
Alex_M replied to the thread Trailblazer torque converter with a 5.3?.I used one for a core for a converter I had rebuilt. My rebuilder told me they have issues with heat behind the v8s in a truck...
-
Alex_M replied to the thread AC Schrader Valves.Correction - the rubber check ball is actually on the low side of mine. I had to replace this line yesterday myself.
-
Alex_M replied to the thread AC Schrader Valves.Not sure which years have which. Mine are '00 and '02.
-
Alex_M replied to the thread AC Schrader Valves.The high side on both of mine have a rubber check ball, not a schrader valve. Unfortunately it also is of the non-replacable variety...
-
Alex_M replied to the thread Question about the TBSS / NNBS intake upgrade.For calculating fuel demand, you want to go by those higher numbers (ie. without accessories or drive train losses) because that is the...
-
Alex_M replied to the thread How to: EGR Delete, tube block off..If you leave the EGR valve in place and connected to the wiring harness then there should not be any code thrown at all. The ECM only...
-
Alex_M replied to the thread What did you do to your NBS GMT800 Tahoe/Yukon Today?.I just got this posted up for those who were waiting for some more detail.
-
Alex_M replied to the thread How to: EGR Delete, tube block off..
-
-
Just a small quick post for those who want to block off their EGR, for those installing headers or whatever else reason. I will give a...
-
-
Alex_M replied to the thread How to: '99-'02 TBSS Intake Swap.Here you can see the Corvette fuel filter installed on the later model fuel rails. You can see that I did have to cut the tab between...
-
-
-
Loading…
-
Loading…
