Search results

  1. clandr1

    Rhino Rack Pioneer Platform Installation

    Hi all, I recently picked up a like new condition Rhino Rack Pioneer Platform. I plan on installing it using a combination of the items below. Has anyone installed on of these, and if so, can you give me any suggestions or tips? I'm not sure the $315 set of SX100 legs will work with my...
  2. clandr1

    Broken head rest 2nd row buckets

    Hey everyone, A few months back I was climbing around in my truck and accidentally put too much weight/pressure on the folding headrest, causing it to snap/pop. The headrest is now pretty loose. I'm wondering if anyone has encountered this issue before, and potentially help me understand how I...
  3. clandr1

    Drop in oil pressure

    Hey guys, up until about a year ago my truck would hold a minimum of 40 psi oil pressure at idle no matter whether the motor was cold, or warm. After a 6 hour each way trip in March of 2021, I noticed my "hot" oil pressure was around 30 psi. As this summer has set in, I've noticed the hot idle...
  4. clandr1

    GMC Yukon XL 2500 pricing?

    Hey everyone, I found a mint condition 2003 GMC Yukon XL 2500 4x4 with the 8.1L motor with only 60k miles on it. The dealer is asking $34k. This seems about 10k too high to me (maybe even 15k too high). My 1500 Yukon has been so great to me, that I wouldn't mind paying good money for a 3/4T...
  5. clandr1

    Occasional transmission slip from complete stop

    Hi everyone, I've been dealing with this issue for about the last 30,000 miles or so. It started after a fluid and filter change around 195,000 miles. On occasion, the transmission will hesitate/slip when I begin to apply gas to start moving after coming to a complete stop at an intersection...
  6. clandr1

    Replaced driveshaft u joints, now leaking output seal

    Hi everyone, This weekend I replaced my u joints on my driveshaft (they were in good shape upon inspection, but were OEM so I decided to be proactive after 220k miles). After reinstalling the driveshaft and driving around the last couple of days, I now have transmission fluid leaking out of the...
  7. clandr1

    SOLVED PAGE 5: Shudder/shake/vibration when hitting bumps at highway speeds

    Hi everyone, I decided to place this thread here, even though I have 100% factory suspension. I've recently noticed an issue where the truck seems to develop a temporary shudder/shake after hitting a bump on the highway (going 70mph). I have owned the vehicle since new. It currently has...
  8. clandr1

    Center console lid rubber bumpers

    I've searched high and low and haven't found a good OEM or aftermarket replacement for the 5 little rubber bumpers that mount to the bottom of the center console lid. I visited the dealer yesterday and they don't sell them separate from the lid. I purchased these from Amazon, but the diameter...
  9. clandr1

    Longest time idling?

    Hey everyone, I do a fair amount of hunting/camping, and always take my Yukon. Sometimes I bring my ARB fridge/freezer and run it off my primary (starting) battery. I usually fire up the truck and let it run for 30-60 minutes to recharge the battery when my fridge pulls it below 11.5 volts...
  10. clandr1

    Hard to turn steering wheel only while turning left

    I have a weird issue - my power steering pump makes a hissing noise that I can hear in the cab, but only when turning left at slow speeds. The steering wheel is also hard to turn. When I turn right, everything is normal. I don't have any power steering leaks. Truck is 13 years old, I'm the...
  11. clandr1

    Helton hot shower system install 2005 GMC Yukon

    Hi everyone, I'm starting this thread hoping to help the adventurers among us enjoy a little bit of luxury when on long camping or work trips where a hotel and a shower aren't always available or convenient. I did not take pictures during the installation, but hopefully the pictures and links...
  12. clandr1

    High silicon content in oil

    Hi everyone, I've sent four oil samples to Blackstone Labs over the last 3 years, and each time my silicon readings have been higher than universal averages (see bottom row of the attached picture). The techs at BL have suggested checking the air intake system for cracks or leaks, implying...
  13. clandr1

    2005 Tahoe/Yukon seat heater element $40

    This is an original part taken off my 2005 GMC Yukon SLT when I replaced my seat cushion/heater/cover. It has always worked fine and appears to be in great shape. I didn't need to replace it, I just wanted to while I was doing the seat cushion. $40 shipped in the USA. I will not ship...
  14. clandr1

    Fuel pump/fuel pressure question

    Hi everyone, hoping you can help me here. Vehicle: 2005 GMC Yukon SLT 5.3L flex fuel. 145,000 miles. All original. Issue: extended crank on start up, sometimes doesn't start after first crank or starts very slowly/sluggishly. Once running, the vehicle is 100% at both idle and at speed...
  15. clandr1

    Replacement seat cover: OEM versus aftermarket

    So I called my local dealership and he quoted me $498 for a replacement seat cover for my '05 Yukon. I see aftermarket covers on eBay for $195. Has anyone compared them, and is the quality difference enough to justify spending more than twice the price on the OEM? Is the quality difference...
  16. clandr1

    Condensation draining only when blower fan is on

    Hey everyone, The last couple of mornings I've had the same issue. I'll lay out the order of things so hopefully it is easier to diagnose. 1. I run the A/C on the drive home 2. I park on my slightly angled driveway, nose facing uphill 3. I turn the truck off and let it sit overnight 4...
  17. clandr1

    Blackstone Labs report?

    I just got my first Blackstone labs report, and it said everything looked good. The only two call outs were lead content on the "higher end of the normal range", which they interpreted meant the bearings were wearing at a slightly higher rate than normal, but nothing to worry about at this...
  18. clandr1

    Just replaced pitman arm, idler arm, tie rod ends

    Please note: do not use the MOOG pitman arm. It is not within spec and will not install properly. You know, I bitched about it last night (took me from 530-1030 with a half hour break for dinner) but it really wasn't all that bad. The two worst parts: Installation of the new pitman...

Forum statistics

Threads
137,759
Posts
1,991,302
Members
102,742
Latest member
CKendrick

Latest posts

Back
Top