The lower Snap On box is 54" wide and 38" tall and not sire of depth but is a KRL715B and all 3 boxes have the ball bearing style drawer slides/glides. It is the deep drawers and not the real old shallow depth. One big drawer from side to side and 5 narrow drawers on left and 5 bigger drawers on right. The top box is unknown width and has the large storage under the lid at top and 4 other side to side drawers. The 4 drawers pulls are exposed and just has a short side to side lip where it locks. The side box has a locking cover and has 5 drawers with the bottom drawer being deep with lots of air tools. Sorry, do not have the top and side boxes model numbers. It is all full of Snap On and Mac Tools. 82 year old retired shop owner. He originally advertised for $20k and then went down to $10k and I can get it all for $7k. He will not split it up. The very large wrenches are 1 5/8", 1 1/2", 1 7/16", 1 3/8", 1 5/16", 1 1/4", 1 1/8" and 1 1/16' and are all long reach wrenches. Like new. Just dirty. They wipe clean as new.. There is also 2, like new, Snap On beam torque wrenches, a 3/8" and 1/2".
Sorry, the very last pic is out of order. I knew I missed one and added at end. I cleaned up the large wrenches and pics of boxes and the 76 piece tap & die set.
Sorry, the very last pic is out of order. I knew I missed one and added at end. I cleaned up the large wrenches and pics of boxes and the 76 piece tap & die set.
Last edited:
Joe you’re all good man. I had just read the initial post, apologized to my daughter for yelling, dog jumped on my lap and in a rare moment, started counting my blessings.
