What did you do to your 21+ T1XX today?

[Tyrell]

From https://www.0fx2gv.com/ . You will likely need to email or message them on the site as they only have Sierra / Silverado listed, but they do Yukon and Tahoe as well. I looked at all the pictures they had and emailed them via the "contact us" link and asked for what I wanted. about $65.

Thank you very much!

 

[Yukon21Denali]

For badge removal, use heat gun if you have one. Use floss or fish line keeping it pulled closer to the badge and not the panel to cut thru the adhesive. Finally goo gone to clean the leftover glue from the panels.

 

[Yukon21Denali]

Swapped the switch bank on my 21 Denali with 22 part to get 360 camera button and the auto stop eliminator as well, all plug n play.
Check this thread out..

 

[Morales1995]

This is how mine came out. It is a little darker than I was thinking. It is a wrap that the guy put on that tinted my front windows. Looks very dark when sitting, but when the rear lights are on it has more of a smoked look.

What tire size do you have on yours if you don’t mind me asking?

 

[SpartanTahoe]

What tire size do you have on yours if you don’t mind me asking?

I had stock tires on mine. 275/50 22 I believe.

 

[ItIsWhatItIs]

Be careful out there folks. Everyone was ok, except for the civic haha. Here’s to hoping they don’t total it out so we don’t have to wait another year.

 

[ItIsWhatItIs]

@ItIsWhatItIs the Vossen wheels look really good! And with some new Michelin LTX's; They're great year round tires. What size tire did you go with? They look a bit bigger than stock?

Bummer on the paint coming off on the rear hatch while debadging. Did you use a heat gun at all in your process of removing the badges to soften up the adhesive?

No I did the stock size 275/50R22 because Costco will only replace like for like. They even had to inspect the wheels before they would agree to install them.

Yep I used a heat gun while prying off the badges, but not when I used the rubber wheel…maybe that would have helped, but who knows.

 

[Big John]

Getting trailer ready. Ride

 

[mandmlakeville]

Be careful out there folks. Everyone was ok, except for the civic haha. Here’s to hoping they don’t total it out so we don’t have to wait another year.

Noooooo. Hate to be a prophet of doom, but we did this to our '18 in February. All the body and frame work was done in a few weeks and it's been waiting on a grille since then. Projecting mid June currently. Here's to hoping you don't experience the same with your '22... have been admiring your ride from the sidelines. Have it's twin with a 6.2 in Satin Steel.

 

[ItIsWhatItIs]

Noooooo. Hate to be a prophet of doom, but we did this to our '18 in February. All the body and frame work was done in a few weeks and it's been waiting on a grille since then. Projecting mid June currently. Here's to hoping you don't experience the same with your '22... have been admiring your ride from the sidelines. Have it's twin with a 6.2 in Satin Steel.

That was one of my major concerns after. Finger crossed but the body shop said one of their sales guys did roughly the same thing to his 21 Suburban back in June and they were able to get all the parts in about 3 weeks.

Love the satin steel with black combo, great looking ride!

 

[svt1998gt]

Replace the stock z71 emblems with the slight larger black ones. I used, car panel removal tools, painters tape to hold the line, use the Z as your reference point, heat gun, and goo gone and clean microfiber cloths. Took 10 minutes per side.

 

[MBTahoe]

After testing a bunch of different bulbs from Amazon, I finally found the ones (turn signal & backup bulbs) that don't give me an error code. Now, I still haven't found bulbs for tail/brake that don't give an error code. Has anyone found LED tail/brake bulbs with no error code? Here's the links for the blinker&backup bulbs I'm using:

Amazon.com

Amazon.com

Could you upload a video of how your turn and reverse lights work?

 

[Tyrell]

New Husky floor mats in front, 2nd row, 3rd row, cargo area. Booooring.

I've got the Weathertech power-running-board-friendly mudflaps for install tomorrow/this weekend.

 

[suterusu]

New Husky floor mats in front, 2nd row, 3rd row, cargo area. Booooring.

I've got the Weathertech power-running-board-friendly mudflaps for install tomorrow/this weekend.

I'd love to see pictures of those mudflaps when you get them on!

 

[wendal]

Swapped the switch bank on my 21 Denali with 22 part to get 360 camera button and the auto stop eliminator as well, all plug n play.
Check this thread out..

Can you show picture of the new switch bank?

 

[Tyrell]

I'd love to see pictures of those mudflaps when you get them on!

Just posted a thread here: https://www.tahoeyukonforum.com/threads/weathertech-mudflaps-on-22-yukon-denali.134534/

 

[Yukon21Denali]

Can you show picture of the new switch bank?

 

[wendal]

Very cool! and no software update or anything? Do you by chance have the part #?

 

[Yukon21Denali]

Plug and play, check the other thread I linked in my previous post for more details.

 

[svt1998gt]

Bowtie puddle lights