GMC weather mats/cargo liner install ...

[JasonHTX]

Has anyone else has issues with the cargo liner velcro sticking to the soft carpet material on the back of the rear seats? Mine won't stick ...

https://accessories.gmc.com/product...gine=6.2L V8 GAS&engineId=5920&bodyNumDoors=5

 

[jjobev]

Same problems for. I bought some more 3M Velcro strips and the top part that connects to the seats has worked ok. The smaller section in the cargo area slides all over the place. I need to add some new Velcro strips but just haven’t done it. That is just temporary fix though it seems.

 

[Stbentoak]

Personally, I’d install snaps on them and be done....

 

[JasonHTX]

Personally, I’d install snaps on them and be done....

Can you post a link to what snaps? I am not sure what they are.

 

[Stbentoak]

Can you post a link to what snaps? I am not sure what they are.

Something like this should work or a variation thereof....

Amazon.com: 150 PCS Canvas Snap Kit with 2Pcs Setting Tool, Metal Screws Snaps Marine Grade 3/8" Socket Stainless Steel Boat Canvas Snaps for DIY Boat Cover Furniture: Arts, Crafts & Sewing

 

[SAdude]

Just installed my new liner a week ago and no problems so far. I do plan to add additional velcro becasue I've heard the factory pieces don't stick well to the carpet. The entire liner feels cheap and crappy the same as the fasteners. This part was a fail by GM and is not nearly as nice as the ones Toyota makes. I'm not brave enough to drill into my seat to install those snaps linked above and I also don't see how the other part of the snap would fasten to the bottom of the liner, but if anyone tries it plz post back results.

 

[d0wnShifT]

Same issues with mine. Last time it was in the shop they fixed the driver side, now the passenger side is falling. guess i'll have them fix that next.

 

[JasonHTX]

Something like this should work or a variation thereof....

Amazon.com: 150 PCS Canvas Snap Kit with 2Pcs Setting Tool, Metal Screws Snaps Marine Grade 3/8" Socket Stainless Steel Boat Canvas Snaps for DIY Boat Cover Furniture: Arts, Crafts & Sewing

That's a great suggestion, thanks for sharing!

 

[Evergreen0375]

I'm having this problem with my Tahoe cargo liner. It's incredibly frustrating - the velcro doesn't even come close to sticking. absolutely terrible design, not sure how I'm going to fix it. Also I agree with the comments that the liners feel very cheap in general. Disappointing considering how high end everything else feels in the truck.

 

[Highway3]

Same issue. The cargo liner just slips around and is a hassle when loading and unloading anything heavy.

 

[Evergreen0375]

I tried buying new velcro to secure the cargo liners to the back of the chairs, but nothing seems to work. The hook side of the velcro just does not adhere whatsoever to the carpeting on the back of the chairs.

Has anyone found a work around that doesn't require me drilling into the back of the seats?

 

[jjobev]

3M Velcro strips have worked ok for me on the part that attaches to the back of the 3rd row. But I have had no luck using Velcro on cargo liner. Works for a few days and I have same experience where it doesn’t do good job of sticking to carpet. Next time I have to bring the vehicle in for service I plan to ask about it. I put the 3rd row up and down a lot so like the idea of how this works. Just not the execution.

 

[JasonHTX]

I haven't found anything. Talked to the service dept at the dealer, they said to just bring it in and they may figure something out. I haven't had a chance to take it by yet.

Apparently Lowes doesn't sell the 3M product.

 

[B520044]

Here is a good alternative. I like the side covers also, because the plastic is very easily scratched.

https://www.canvasback.com/gmc-yukon-cargo-liners-2021.html

 

[SAdude]

Here is a good alternative. I like the side covers also, because the plastic is very easily scratched.

https://www.canvasback.com/gmc-yukon-cargo-liners-2021.html

View attachment 273563
View attachment 273564

Interesting, never seen this. I wonder if it's easy to clean.

 

[Gibby13]

Here is a good alternative. I like the side covers also, because the plastic is very easily scratched.

https://www.canvasback.com/gmc-yukon-cargo-liners-2021.html

View attachment 273563
View attachment 273564

Thanks, we have the liners but definitely getting those cargo side pieces.

 

[JasonHTX]

I ordered some marine/boat snaps like @Stbentoak suggested in this thread. I have them sitting in my garage, but I haven't put them in yet. Wedding anniversary this weekend, so I am probably going to do it the following weekend. I will try to take pictures and document the process so I can share here. Dealership said to bring it by and they will get them in, but I am a pretty capable person -- I don't think the dealer will be able to pull off any magic here. It's just an incompatibility of materials. So I am not going to waste my, or the dealer's, time by taking it to them for this.

 

[Bob Berkey]

I’m having this same issue. The 3rd row liners don’t seem to fit and cargo liner is crap. I just ordered WeatherTech. Anyone else tried other options and are they any better?

 

[Stbentoak]

I’m having this same issue. The 3rd row liners don’t seem to fit and cargo liner is crap. I just ordered WeatherTech. Anyone else tried other options and are they any better?

I talked to Husky last week and they are within weeks of offering a true rubber based cargo area mat for Tahoe/Yukon. It is the answer and will be worth waiting for. I suspected the the GM liners we just flat lifeless pieces and have not wasted money on them yet. I’m leaning towards Lloyds mats for the passenger areas and waiting for Husky for the cargo area currently....

 

[Stbentoak]

Ordered Lloyd Luxe mats for all areas including small cargo mat. Best combo of price and delivery (1 week..). I noticed on other sites that delivery is starting to push out on rubber/plastic mats sometimes 4-6 weeks. Has to be materials or Labor issues....Can't afford to wait and go unprotected on new carpets....