What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[Rocket Man]

The OEM bolts are longer than 5/8. I bought 5/8 as that is what the spec is but the OEM ones are like 1” but have threads to about 3/4. I need to dig them out of the trash and measure accordingly or you can pull one out and measure. Note that the OEM ones have the long unthreaded part at the end like the body bolts; pilot end? I can’t think of the name of that feature.


Sent from my iPhone using Tapatalk

ARP sells a stainless steel set for our 10 bolt rear ends that I got on EBay for about $30 shipped.

 

[Drok]

@trailblazer

I found the paper with what my parts guy gave me for the oem bolts

 

[NathanJax]

ARP sells a stainless steel set for our 10 bolt rear ends that I got on EBay for about $30 shipped.

link?

 

[Rocket Man]

link?

Just search for GM 10 bolt rear end ARP bolts.... It was quite awhile ago so I don’t have the link unless I go search.

 

[Drok]

Well tis done. I swapped out the bw v300 for a factory 18 muffler. Kinda weird though, its still got that nice grumble like the bw but its ALOT quieter inside and just a bit quieter outside.

 

[aflumb]

Well been awhile. Don’t really mess with the Tahoe much since I got my truck. But today was the day to give the Tahoe a lil love

Stared under the hood

Also sucked the old brake fluid out. Going to let the wife drive this week then I’ll swap it completely out. Also cleaned the outside


Sent from my iPhone using Tapatalk

 

[JML07denali]

Replaced the throttle body, two manifold bolt repair kits and two new front Arnott passive struts.

Next in the list: Driver side motor mount.


Sent from my iPhone using Tapatalk

 

[BG1988]

Well tis done. I swapped out the bw v300 for a factory 18 muffler. Kinda weird though, its still got that nice grumble like the bw but its ALOT quieter inside and just a bit quieter outside.

should have went with a 08-13 HY 6.0 muffler

it has two Extra LARGE muffler setup for maximum quietness but you have to delete your spare tire though

 

[kbuskill]

Also sucked the old brake fluid out. Going to let the wife drive this week.


Sent from my iPhone using Tapatalk

No mention of adding any back in....

Trying to get rid of her??? Lol

 

[sarneson91]

^This is what I was thinking when I read it

 

[PG01]

^This is what I was thinking when I read it

X2

 

[aflumb]

No mention of adding any back in....

Trying to get rid of her??? Lol

Yes I filled it back up. Not trying to upgrade anytime soon


Sent from my iPhone using Tapatalk

 

[Sam Harris]

^This is what I was thinking when I read it

Yup. Lol

 

[mattjones]

I did the rear end finally. I had to use a 12mm socket on the rusted 13mm bolts tapped on with a hammer to get them off. I also used a propane torch to help loosen them up. The new Amsoil containers are awesome! Installed new stainless bolts.

Sent from my iPhone using Tapatalk

******** dude, did you drive into the ocean?

 

[PG01]

******** dude, did you drive into the ocean?

Thats our northeastern salty roads....gotta love it... err... hate it

 

[PG01]

Cherry popper.... 1st check engine light today........

 

[Tonyrodz]

Cherry popper.... 1st check engine light today........

View attachment 220550

What is it?

 

[randeez]

time for new engine

 

[Rocket Man]

Cherry popper.... 1st check engine light today........

View attachment 220550

What is it?

Hes not driving fast enough.

 

[PG01]

What is it?

Bad gas.....hehe