Goodinblack
I Like Tacos
While researching blown subs I found this lol
Seems legit though
Seems legit though
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
SirReal63
Full Access Member
That is painful.
95escahoe
Full Access Member
- Joined
- Aug 2, 2010
- Posts
- 5,162
- Reaction score
- 4,466
Installed the Kenwood HU
Pulled the factory CD changer
Then gutted the CD changer, I’m going to install a single din pocket in the case and mount it like it was from the factory, should have it all set Tuesday night
Sent from my iPhone using Tapatalk
Pulled the factory CD changer
Then gutted the CD changer, I’m going to install a single din pocket in the case and mount it like it was from the factory, should have it all set Tuesday night
Sent from my iPhone using Tapatalk
05Single
afraid of the dark
- Joined
- Feb 26, 2015
- Posts
- 8,244
- Reaction score
- 11,646
05Single
afraid of the dark
- Joined
- Feb 26, 2015
- Posts
- 8,244
- Reaction score
- 11,646
Sold the tahoe. Wanting to get back into a pickup. Got a f150
Shaw520
Full Access Member
- Joined
- Feb 28, 2018
- Posts
- 415
- Reaction score
- 391
Installed the Kenwood HU
Pulled the factory CD changer
Then gutted the CD changer, I’m going to install a single din pocket in the case and mount it like it was from the factory, should have it all set Tuesday night
Sent from my iPhone using Tapatalk
Yes!,...put the same unit in my truck a couple weeks ago,.. added a backup camera too! I love it
Goodinblack
I Like Tacos
95escahoe
Full Access Member
- Joined
- Aug 2, 2010
- Posts
- 5,162
- Reaction score
- 4,466
HiHoeSilver
Away!
You lie.
Shaw520
Full Access Member
- Joined
- Feb 28, 2018
- Posts
- 415
- Reaction score
- 391
Shaw520
Full Access Member
- Joined
- Feb 28, 2018
- Posts
- 415
- Reaction score
- 391
Got this one,... works excellent and came with plenty of cord.
https://www.ebay.com/itm/170-Car-Re...ash=item465dedba20:g:U4MAAOSwfVhaAbWC&vxp=mtr
Like a ****** rug
00'BlueSteel
Full Access Member
Disbelief...........
bottomline2000
Full Access Member
Juat did a steering overhaul..new a.c. Delco steering box, a.c. Delco pitman arm was rather new so I reused it. Box sprung a leak and was acting weird in general. Also replaced the heim links on my steering and put some condoms on them to keep my girl safe lol.. my heims would squeal after a while so being bare they get exposed to too much., hopefully the boots hold up..they are made for off-road but are stronger than the factory tie rods..
Also did an in house alignment..it worked and got me to Sears for a real one without burning up my tires..
Sent from my SAMSUNG-SM-T377A using Tapatalk
Also did an in house alignment..it worked and got me to Sears for a real one without burning up my tires..
Sent from my SAMSUNG-SM-T377A using Tapatalk
Tonyrodz
Resident Resident
What's up with yhose headlights? Looking a little yellow.Juat did a steering overhaul..new a.c. Delco steering box, a.c. Delco pitman arm was rather new so I reused it. Box sprung a leak and was acting weird in general. Also replaced the heim links on my steering and put some condoms on them to keep my girl safe lol.. my heims would squeal after a while so being bare they get exposed to too much., hopefully the boots hold up..they are made for off-road but are stronger than the factory tie rods..
Also did an in house alignment..it worked and got me to Sears for a real one without burning up my tires..
Sent from my SAMSUNG-SM-T377A using Tapatalk
00'BlueSteel
Full Access Member
Juat did a steering overhaul..new a.c. Delco steering box, a.c. Delco pitman arm was rather new so I reused it. Box sprung a leak and was acting weird in general. Also replaced the heim links on my steering and put some condoms on them to keep my girl safe lol.. my heims would squeal after a while so being bare they get exposed to too much., hopefully the boots hold up..they are made for off-road but are stronger than the factory tie rods..
Also did an in house alignment..it worked and got me to Sears for a real one without burning up my tires..
Sent from my SAMSUNG-SM-T377A using Tapatalk
Where’d you get the boots for the tie rods? I’ve been thinking about putting a pair on myself.
bottomline2000
Full Access Member
Lol..I'm done with them until I can find something cool like the yukons have with led strips.. ironically my neighbors son was using my buffer to clean up his headlights while I was working on my truck..long story short...I just want new lights..
Sent from my SAMSUNG-SM-G900A using Tapatalk
bottomline2000
Full Access Member
I'll have to check. I went on a road trip after working on my truck so I should be able to confirm when I get back home..
Sent from my SAMSUNG-SM-G900A using Tapatalk
Where did you get those heim tie-rods? Is the stud that goes through the spindle tapered? I’ve been looking for heim tie rods and all the ones I’ve come across use a grade 8 bolt that goes through the spindle hole
Sent from my iPhone using Tapatalk
ArcticYukon
The White Yuke has been superseded by a Red Hoe
Cleaned out the throttle body, then my friend came over with his Snapon scanner and monitored the sensor voltages, trims, and all the stored codes. Said the MAF voltage is a little off and suggested I clean it next. Cleared all the codes.
Motor ran and drove great for 2 evenings without any CEL or any troubles. Next cold morning, my wife started it up without any problem, got 5 minutes down the road and CEL popped with REP mode... had to let it sit there for 10 minutes until the temp got above 185, then shut it off and back on again so she could drive it. CEL was off by that afternoon when I went to take a look at it. Took it back to Autozone to see if they could pull any stored codes. Sure enough, P1515. Looks like that TB sensor is going to need to be replaced. The number printed on the sensor indicates it's an AC Delco... too bad I don't know where the PO got it from, I could warranty it.
Here's B&A pics of the TB. Definitely needed to be cleaned.
OH... and now there's a pinhole leak in one of the plastic side tanks on the radiator. Gotta love high mileage vehicles.
Motor ran and drove great for 2 evenings without any CEL or any troubles. Next cold morning, my wife started it up without any problem, got 5 minutes down the road and CEL popped with REP mode... had to let it sit there for 10 minutes until the temp got above 185, then shut it off and back on again so she could drive it. CEL was off by that afternoon when I went to take a look at it. Took it back to Autozone to see if they could pull any stored codes. Sure enough, P1515. Looks like that TB sensor is going to need to be replaced. The number printed on the sensor indicates it's an AC Delco... too bad I don't know where the PO got it from, I could warranty it.
Here's B&A pics of the TB. Definitely needed to be cleaned.
OH... and now there's a pinhole leak in one of the plastic side tanks on the radiator. Gotta love high mileage vehicles.
Similar threads
