What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[GranPrix]

Dropped my Hoe off at the body shop.

 

[bryank97]

Added a 1.5" spacer up front and got it aligned, pretty happy with the results

Heres a Before and After

 

[swathdiver]

Much better Bryan! Can't wait to do that to mine.

 

[mtc1328]

I finally got around to repairing the exterior front door handle. I replaced it with another Dorman part purchased on Amazon. I managed to take the door panel off and put it back on without breaking any clips, so I consider it to be a success.
I used the 1AAuto video on YouTube at

for reference.

 

[osidesurfer365]

Replace old steering wheel emblem with new one. Black on old one started to peel so I scraped it all off and it drove me nuts.

Sent from my iPhone using Tapatalk

 

[Rocket Man]

Replace old steering wheel emblem with new one. Black on old one started to peel so I scraped it all off and it drove me nuts.

Sent from my iPhone using Tapatalk

I need a new one for my Silverado. Where'd you get it?

 

[osidesurfer365]

I need a new one for my Silverado. Where'd you get it?

Only place I could find one. There are several videos as well on YouTube on how to remove airbag to get to the emblem. 15 min tops.

https://m.ebay.com/itm/NEW-GMC-SIER...OEM-QUALITY-/122310716570?txnId=1918716080002


Sent from my iPhone using Tapatalk

 

[osidesurfer365]

Had to order a cover for my light bar behind my grille. Highway patrol must of been having a bad day and gave me a ticket

 

[PG01]

I need a new one for my Silverado. Where'd you get it?

@NathanJax just did this also

 

[gpracer1]

Flushed rear brake lines and fronts. Replaced front calipers with police calipers and pads and R1 geomet cryogenic slotted rotors.

 

[Rocket Man]

Only place I could find one. There are several videos as well on YouTube on how to remove airbag to get to the emblem. 15 min tops.

https://m.ebay.com/itm/NEW-GMC-SIER...OEM-QUALITY-/122310716570?txnId=1918716080002


Sent from my iPhone using Tapatalk

I found the bowtie one on Amazon for $15. It says it pops on, no need to remove the airbag. Just pry the old one off, then bend the tabs just right and it snaps on. I watched them disassembling the airbag and I'd rather not.

 

[NathanJax]

I watched them disassembling the airbag and I'd rather not.

But it was so much fun....

Actually very scary, but I did it. I wouldn't try to pull the old one off. the tabs are pushed in very had from the factory. plus I'm 100% you can't get the new one to stick like the old one buy just bending the tabs carefully.

 

[Rocket Man]

But it was so much fun....

Actually very scary, but I did it. I wouldn't try to pull the old one off. the tabs are pushed in very had from the factory. plus I'm 100% you can't get the new one to stick like the old one buy just bending the tabs carefully.

I saw a YouTube that says otherwise. Seen it with my own dadburn eyes. Ima gonna do it.

 

[osidesurfer365]

But it was so much fun....

Actually very scary, but I did it. I wouldn't try to pull the old one off. the tabs are pushed in very had from the factory. plus I'm 100% you can't get the new one to stick like the old one buy just bending the tabs carefully.

I agree it was a bit sketchy taking it apart, kept thinking it was going to go of accidentally.



Sent from my iPhone using Tapatalk

 

[osidesurfer365]

I saw a YouTube that says otherwise. Seen it with my own dadburn eyes. Ima gonna do it.

I can almost guarantee if you try and remove the old one without taking the airbag off it will mess up the plastic around it and the new one will not sit snug enough. I have no problem doing a video on how to do it if you would like


Sent from my iPhone using Tapatalk

 

[Rocket Man]

I can almost guarantee if you try and remove the old one without taking the airbag off it will mess up the plastic around it and the new one will not sit snug enough. I have no problem doing a video on how to do it if you would like


Sent from my iPhone using Tapatalk

I've seen both videos. I'll try the shortcut first and if it looks like it's gonna mess up I'll pull the airbag.

 

[NathanJax]

I saw a YouTube that says otherwise. Seen it with my own dadburn eyes. Ima gonna do it.

 

[Shaw520]

New rotors and pads on the rear,..got rid of the annoying brake pulsation i was getting, sprayed the under carriage with fluid film,....and installed the Kenwood DDX395 head unit...very productive day.

 

[NGAneer]

Flushed rear brake lines and fronts. Replaced front calipers with police calipers and pads and R1 geomet cryogenic slotted rotors.

Loving my Geomets so far.

 

[NGAneer]

Had to order a cover for my light bar behind my grille. Highway patrol must of been having a bad day and gave me a ticket

Huh? Just for having one or were you using it on the road?