How to install my pioneer avic-z110BT HELP!!! ME

[yukon07Artic]

Im installing the pioneer avic-z110bt and i came up with 3 issues.
I have a yukon 07 slt

1. Where is the vehicle injection computer? and where do we hook up the car speed signal input wire on the vehicle injection computer?

2. where is the easiest place to wire up the reverse gear signal input wire?

3. where is the parking break wire?

I think all this has to do with navigation which is a pain in the ass if you dont know where these are.

I need someone who installed a pioneer headunit with navigation to help me find these for my install, thanks in advance

 

[nytahoe]

# 3 hook up to a ground so u can use it in drive.
when i hooked mine, up revesrse and speed wire was in the harness
i had the bose onstar mod. and if u want to use it in drive u have to stick a wire in next to the mute wire.

 

[yukon07Artic]

# 3 hook up to a ground so u can use it in drive.
when i hooked mine, up revesrse and speed wire was in the harness
i had the bose onstar mod. and if u want to use it in drive u have to stick a wire in next to the mute wire.

did you hook up your pioneers yourself? i think i might take it to my friends audio shop tomorrow.

 

[nytahoe]

yea did it myself not hard man. the harness gives u everything u need, but u do have to cut out some of the dash behide the radio to make it fit.

 

[Scotto2323]

avic411.com if you are running into some problems.

 

[yukon07Artic]

Just got my avic installed.
anyone know how i can use volume controls from steering wheel?

 

[Scotto2323]

You need a steering wheel control interface. PAC makes them. PAC model SWI-PS is the one for Pioneer that should with the remote plug-in on your HU
http://www.pac-audio.com/swixprogramming/swixprogramming.asp

 

[yukon07Artic]

Here is a picture of my cabin after install
Mike and gps antenna installed on driver side top left corner pillar and dashboard respectively. ipod input installed on glove compartment.

 

[nytahoe]

looks good man but is that the right dash kit?

---------- Post added at 02:10 PM ---------- Previous post was at 02:08 PM ----------

thats mine.

 

[yukon07Artic]

looks good man but is that the right dash kit?

---------- Post added at 02:10 PM ---------- Previous post was at 02:08 PM ----------

thats mine.

it is a legit dash kit that fits standard double dins but yours look soo much better. where did you get your dash kit?

ohh and i love your wood trim

 

[nytahoe]

i got mine from my job. its a metra dash kit. 95-3305 part #

---------- Post added at 02:40 PM ---------- Previous post was at 02:39 PM ----------

o and the wood trim it stock ltz

 

[yukon07Artic]

so anything else you do to your pioneers? mods?

 

[nytahoe]

nope havent done anything to it. i still didnt put any wall papers on it.. what have u done to urs?

 

[yukon07Artic]

lol i just got it installed 2 days ago. basically the same thing as you though.
http://www.youtube.com/watch?v=N7H0iJoEGNo
Bypass

and hooked it up to ground so i can see my rearview

ohh and my wall paper. lol

 

[nytahoe]

yea i did the bypass when i put it in. its a great hu. the eq is great and the ipod is fast and very easy to use. plue it will work with iphone and i touch

 

[blaqout]

I heard there is a mod for these that will allow you to see speed traps. I have to get one of these units man!

 

[yargnits]

couldn't you guys use the factory mics and antenna from the onstar system?

 

[zilla315]

Man that looks really good, it's cleeeeen.

 

[yukon07Artic]

couldn't you guys use the factory mics and antenna from the onstar system?

everything comes with the unit. mic and all. i dont believe you can use factory onstar system without having to go into details

 

[NolaTahoe]

got the same unit i love it