I was wanting to do the Z06 caliper swap on my 2003 Yukon Denali XL. And I'm running a set of U2-55 wheels in a 24x10 with a 30 offset. I can't find out if these wheels will clear the Z06 calipers or not. Do any of you guys know if it will work or not?
Z06 Calipers
- Thread starter Wagnasty
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
TheAutumnWind
Full Access Member
- Joined
- Jan 8, 2015
- Posts
- 3,255
- Reaction score
- 1,997
4.32" backspacing with a -30 offset on a 10" wheel.
Factory backspacing is 5.3"?
So you gained an inch of room for bigger calipers if my info is correct.
Factory backspacing is 5.3"?
So you gained an inch of room for bigger calipers if my info is correct.
HoeRyder26
Member
Not to veer off course but would you happen to have a pic of the yukon with the u2-55s? I have an 03 tahoe lt and want to run the same exact wheels set up. The only pictures I can find are of the 26s. Also I'm doing a 2/3 drop with those wheels.
