:wtf: HELP!! L.e.d a/c conversion

[Bomba02]

Hey guys, so what I thought was going to be simple has turned out not so simple. I read and read Scottyboy's thread on how to over and over:
http://www.tahoeyukonforum.com/forum/showthread.php?t=16839
As I started I realized my board is different, thinking because it is a denali? But I tried doing it the same the way as he did but nothing. Tried a few things still nothing. So I'm asking the members here for a little advice as I take the night off and so I don't toss it at the wall. This is the 2nd stage to moving all interior dash and switches over to blue led. Not what I planned here are few pics of my board any help would be great thanks in advance.
Billy

 

[Bomba02]

Anything guys, crickets! Lol. Anyone know of wiring diagrams or any info?
Thanks Billy

 

[Gzes]

You sure you have the right resistors? I had a led that didn't wanna work with resistors yanked it out of the equation and lights worked

 

[Bomba02]

I got the resistors that come with the led from the company. For the pairs that are wired in series (i think they are in series) do they need different value resistor to work? I don't believe they would it just to know the voltage down....
Billy

 

[Dress em up]

The LED's should be in series with the resistor.
Pay close attention to the beginning and ending of each LED set, and put a resistor in the begining OR ending of each circuit, NOT on both ends.

Hope that helps

 

[Jons2005tahoe]

according to his pics and directions you don't need resistors on the bulbs just the wire that supplies power to them nvm now that I look at again he has resistors on the wire to the second board and on the lights on the first board

 

[Dress em up]

Hi Bomba02,
Any luck?

 

[Bomba02]

Hey guys, sorry been busy as shit. I did figure it out after a little positive~negative investigation! I also got some more of the swap done! Can't wait to get it all done looks way better then the stock setup. I have some hot spots and what not might add some led to components soon. Deff gonna add a few to the main A/C panel. Here are some pics not the best off my phone! Thanks again for the info guys.
Billy

 

[Dress em up]

Great job!
Looking good!

 

[Jons2005tahoe]

x2 those look awesome