Wheelwell clerance problems 2007 yukon

[xodeedee]

I recently obtained a pair of 24' rims for my truck . but when they were put on you could not turn the wheel . if i remove the plastic inside the wheel well would that resolve my clearance issue .

appreciate any info i can get

 

[NathanJax]

wrong offset and/or too big of tires.

Need more info to give you better answers. What size tires do they have? Do they stick out away from the fenders?

 

[xodeedee]

ill have to get the tire sizes again . but i have a pitcure of them just so you can see .

 

[Sevenevez]

hopefully you are only rubbing slightly on the plastic inners. which, i have heated the problem area up with a heat gun then cooled it to shape it with more clearance. if you are hitting anything deeper than that. it could be an issue. my 24's rub right now. but i just make sure i dont put myself in a position where i gotta turn the wheel all the way. i cant wait to get rid of these 24's and step down to a 20 though most my cars i just tear that inner plastic out for clearance. but i am in AZ so weather isnt too much of an issue gettin in the wheelwell.

 

[prjeschk]

I was running 24x9.5 KMC Slides with a 25mm offset and 305/35R24 tires on a 2007 Yukon Denali w/no rubbing issues. Offset will kill you on these vehicles, it needs to be near stock(30mm) to fit anything.

 

[xodeedee]

ok finally got the tire size its : 305/35 ZR 24 112 (pirelli tires) . would taking the inner plastic out most likely eliminate this problem? supposed to try and put my rims on again monday or tuesday hoping to find solution before then so its smooth sailing

 

[xodeedee]

found a working solution 295-30-24 tires no rub but pot hole watching is driving me crazy lol

 

[sixpack19]

I'm running 285/35/22. You should do same. 285/35/24


Sent from my iPhone using Tapatalk

 

[xodeedee]

I spent a lot on these tires , not going anywhere for a while sadly lol