What did you do to your NBS GMT800 Tahoe/Yukon Today?

[95escahoe]

Not a bad idea. I'll check the over all condition of my hoses now if I see a crack or the start of one I'll swap them out

Don’t forget the hose that runs through the TB it’s two parts, Amazon has them all, replaced all of mine with Gates when I got mine.


Sent from my iPhone using Tapatalk

 

[Bombsquad85]

Don’t forget the hose that runs through the TB it’s two parts, Amazon has them all, replaced all of mine with Gates when I got mine.


Sent from my iPhone using Tapatalk

Yup. Theres a bunch of hoses. I was looking around yesterday. Didn't look like fun. And I remember when I swapped my radiator out on the Tahoe. The job was easy enough but there were a bunch of lines and hoses

 

[bottomline2000]

Probably never. It only has 105k on it

Over 250k on mine. Dealer told me not to replace them..go figure no issues after all these years. Best hoses I have seen on a car/truck. Check your heater hoses at the firewall. The connections are known to get brittle over time and fail.

I run dexcool with distilled water mix. I never put tap water in my cooling system. No coolant loss over the past 1.5 years since engine swap. It's better than the green stuff if u ask me. Just don't mix them.

Sent from my SAMSUNG-SM-T377A using Tapatalk

 

[Tonyrodz]

Looking good! Some of us have completely destroyed drivers seats lol.

Just finished my drivers seat with Katzskin leather. It matches the 2tone door panels perfectly. The seat bottom where the controls are is a pita!! I'm sure the rest will go faster now that I'm over cutting perfectly good leather lol.

I used Durafoam from The Seat Shop since my bottom was destroyed. It's super comfortable like a couch. I hope it lasts. Figured I'll scrub the interior while I'm at it. Too many dirty hobbies lol.

Sent from my SAMSUNG-SM-T377A using Tapatalk

How hard was it to do the upper seats? Especially with the seat belt.

 

[mdnitedrftr]

Check your heater hoses at the firewall. The connections are known to get brittle over time and fail.

Hmmm...wonder if thats where I might be loosing coolant from...

 

[HiHoeSilver]

Hmmm...wonder if thats where I might be loosing coolant from...

First place to look, for sure.

 

[Bombsquad85]

Hmmm...wonder if thats where I might be loosing coolant from...

I wonder the same thing. I checked the entire front of the cooling system and it was gone dry.

Is there images of where these get brittle and break.

 

[95escahoe]

I wonder the same thing. I checked the entire front of the cooling system and it was gone dry.

Is there images of where these get brittle and break.

Right where hoses connect to the fittings at the firewall


Sent from my iPhone using Tapatalk

 

[HiHoeSilver]

I wonder the same thing. I checked the entire front of the cooling system and it was gone dry.

Is there images of where these get brittle and break.

These two bastards right here ...

 

[HiHoeSilver]

Finally got to my appliqués this afternoon.
Product credit to @ScottyBoy
Painting by @TheGreatGazoo
Thanks, gentlemen!

Out with the old...


Nice of GM to give us a secret stash for a bunch of rotting organic material...


All cleaned up....


Evan told me they'd match the window trim. Damn, son. Nice job!


The big picture...