What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
added / installed a front lip
Is that a factory or street scenes bumper?
seven9st surfer
Full Access Member
Temporarily removed my Onstar and XM antennas to check the hole size (both have a 3/16" and 5/8" hole, if anyone's wondering). The plan is to remove them both and plug with color-matched plugs. Need to do a little polishing up there where the antenna bases were mounted, but I think I can get it looking good enough for a roof. I also removed the aftermarket GPS puck from the middle. Hopefully it'll look a lot cleaner up there when I'm done.
shreksbrother
Full Access Member
Very slick install!
TheAutumnWind
Full Access Member
- Joined
- Jan 8, 2015
- Posts
- 3,255
- Reaction score
- 1,997
I always wanted to ditch those. Should look
TheAutumnWind
Full Access Member
- Joined
- Jan 8, 2015
- Posts
- 3,255
- Reaction score
- 1,997
Looks like stock denali bumper to me
Finished my cam swap, oil pump, timing set and oil pan gasket this morning and installed the front shocks. Took it for a drive and it's a hell yeah. Ill post up videos soon in my build thread.
factory bumper
me too! i wanna know where you get those plugs. i want to delete mine as well
Chubbs
Full Access Member
- Joined
- Jun 24, 2017
- Posts
- 636
- Reaction score
- 396
Wasn't having any luck getting the lid to open on my flip/down center console for the mid jump seat. Did some more reading and sprayed WD40 in it. Opened up almost immediately! This truck is a 2003 but somebody was still living in the 90s when the lid mechanism locked up.
Those make the perfect addition to our Denalis, just be sure to watch curbs when you're pulling into a parking spot. Truck's looking great.added / installed a front lip
M1Gunner
Full Access Member
Anybody know of some "side skirts" for the 800's? With my Hoe sittin up high the holes from the factory trim and nerf bars are somewhat visible, especially from a car height view. Startin to bug me...
Something like how automatic steps would tuck up to the bottom panel.
Something like how automatic steps would tuck up to the bottom panel.
Well....you could install automatic steps!
Sorry! I don't have any other valuable input!
seven9st surfer
Full Access Member
Lowes, here are the baggies, 2 per, for a grand total of like $4
Here's after a few coats of Duplicolor:
I just finished painting, total of 4 coats of Olympic White, 4 coats of Duplicolor Clear Coat. Tomorrow, weather permitting, I'm going to remove the antennas, polish the overall area to try to blend it with my new paint job, then install the plugs with some adhesive sealant.
Then the truck might be ready for a deep clean, then Optimum Gloss-Coat and Opti-Seal...
BADRIDES
Full Access Member
- Joined
- Dec 18, 2015
- Posts
- 1,825
- Reaction score
- 1,278
Which size plug goes for the onstar antenna? The one on the driver's side roof.
seven9st surfer
Full Access Member
There are two. 5/8" and 3/16". Same for the XM on passenger side.
Tonyrodz
Resident Resident
It's like a time capsule.
Saw this today when I started it up.
I'm pretty sure I've read the outside air bag sensors go bad. Anyone have any thoughts on the cause?
Last edited:
'cause of your bad luck lol. Sorry couldn't help myself.
Tonyrodz
Resident Resident
Yeah, I'm just soooooo lucky.
But, on a positive note, non Tahoe related, I picked up a new to me 05 Chevy work van that has the LS 4.8 with the 4l80e combo! Maybe I should get that tuned! Hmmmm...
Last edited:
Hey did you get your engine issues fixed? Is it back to running right?
HiHoeSilver
Away!
The real question is what tapes are those?
Similar threads
