What did you do to your NBS GMT800 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,679
Reaction score
52,949
Location
Oregon
Ok so she's back from the other mechanic. The 4wd problem was simply a blown fuse (which I couldn't find evidently), and in addition to the ABS controller (which they can have refurbished for $665 :eek:) I have a vacuum leak (so I'm running lean) and my knock sensors and harness need to be replaced. After telling him about how I had replaced my transmission on my '96 2 door, he said he had full confidence that I could do everything myself. So one Saturday soon I'll fix my knock sensors, install new gaskets, clean my MAF, and, while I'm in there, maybe install a catchcan. But I'll save about a grand by doing everything myself, which is nice.
Hells yeah.
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
33,201
Reaction score
51,448
Location
Central Jersey
Ok so she's back from the other mechanic. The 4wd problem was simply a blown fuse (which I couldn't find evidently), and in addition to the ABS controller (which they can have refurbished for $665 :eek:) I have a vacuum leak (so I'm running lean) and my knock sensors and harness need to be replaced. After telling him about how I had replaced my transmission on my '96 2 door, he said he had full confidence that I could do everything myself. So one Saturday soon I'll fix my knock sensors, install new gaskets, clean my MAF, and, while I'm in there, maybe install a catchcan. But I'll save about a grand by doing everything myself, which is nice.
I'm glad he was honest with you. So many dishonest mechanics out there.
 

XLDenali06

Full Access Member
Joined
Apr 4, 2017
Posts
194
Reaction score
285
Location
Southeast Tennessee
Went to Wally World yesterday and parked next to a sibling. An older sister, you might say. Lol. The owner was getting to his truck as I was pulling off and he was kind of looking quizzically at my truck. With its esky vent caps and luggage rack, and aftermarket taillight housings and third brake light, he may have been trying to figure out if we had the same truck or not. I thought it was humorous. 20170519_194835.jpg
 

01ssreda4

Full Access Member
Joined
Feb 28, 2014
Posts
1,124
Reaction score
487
Gear swap from a 4.30 to a 4.10. Didnt like the long 2wd DS vibes at 100mph or so, and made the gearset whine by racing a few times within like 20 miles of installing them....and they were too noisy to live with forever so here i am.
 

jaywoo65

Full Access Member
Joined
Mar 28, 2017
Posts
143
Reaction score
178
Location
Cabot, AR
The back liftgate glass hinge broke for the second time. The first time I smeared a bunch of JB Weld on it. That lasted about two months I guess and then it let go again. I found a guy parting out a Tahoe on Craigslist and got a new glass for $75.
medium800.jpg


Also replaced the front Bumpstops, jounce stops, bumpers or whatever they're called. Dorman part number 523-089 or GM part number 15153959 if anyone is curious. Easy to install and make the truck ride quite a bit better. There wasn't much left of the old set.

medium800.jpg
 

kwOH

Banned
Joined
Jun 19, 2016
Posts
2,958
Reaction score
3,514
The back liftgate glass hinge broke for the second time. The first time I smeared a bunch of JB Weld on it. That lasted about two months I guess and then it let go again. I found a guy parting out a Tahoe on Craigslist and got a new glass for $75.
medium800.jpg


Also replaced the front Bumpstops, jounce stops, bumpers or whatever they're called. Dorman part number 523-089 or GM part number 15153959 if anyone is curious. Easy to install and make the truck ride quite a bit better. There wasn't much left of the old set.

medium800.jpg
This is why I hesitated to get the esky rear glass, the hinges could have turned out being in worse shape than my stock glass.


Sent from iPhone 7 plus using Tapatalk Pro
 

#1taho

5150TAHO
Joined
Dec 10, 2013
Posts
1,814
Reaction score
1,175
Location
niagara falls ont
Today was a success got the exhaust off my truck. Converted to the caddy and magnaflow exhaust. Oil change. And summer check over and oil change. My old exhaust go put on my old white beater of my buddies
IMG_5657.JPG

Starting Parts pile
IMG_5662.JPG
IMG_5663.JPG

The old exhaust off mine

This is the factory off my buddiesnext to my old one
IMG_5664.JPG

IMG_5666.JPG

We put the cat on his truck also so his could pass the smog test. Kept failing cause his were bad.

Over all great day
 

2001tahoefuentes

Full Access Member
Joined
Mar 21, 2012
Posts
113
Reaction score
5
Location
Passaic,NJ
Ok, just adding to my build page:pView attachment 79408 View attachment 79409 View attachment 79410 View attachment 79411
Question : Can someone post a pic of how the heater house bracket is mounted on the valve cover. I was able to get one to replace my missing one. View attachment 79412
Note: Tires on the rear are just a hair wider then the fronts, 305/45-22's compared to 305/40-22's. I kind of like the look of it.
Finally somebody else from nj lol

Sent from my SM-N920T using Tapatalk
 

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,244
Reaction score
11,646
Thinking of trading grilles. Guy said yes. Anybody have more pics of this style grille shell?
I think it's a street scene shell
acb5de145b220f9c01d1ad88fdc3c314.jpg
3ae080d6046a54941adc766e3a5f5eec.jpg
 

#1taho

5150TAHO
Joined
Dec 10, 2013
Posts
1,814
Reaction score
1,175
Location
niagara falls ont
IMG_5661.JPG
Here is the taho cats with the caddy cats.
Taho is the y pipe style and caddy is a dual set up.

I went to do the swap from y pipe to the caddy set up. It looked like I had to change the manifolds. So I got them ready. 6 months later and when I got into it the manifolds are exactly the same. They looked different and use different gaskets but they are identical. All gaskets interchangeable on the manifolds.
 

Forum statistics

Threads
137,786
Posts
1,992,236
Members
102,780
Latest member
ASG-MikeS

Latest posts

Back
Top