What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
bottomline2000
Full Access Member
No @Tonyrodz. I have dynatech headers and y pipe. I've seen a lot of guys use the speed engineering setups on pt.net. something has got to be off.
Sent from my SAMSUNG-SM-T377A using Tapatalk
Last edited:
Tonyrodz
Resident Resident
They didn't have any problems with their setups?
05Single
afraid of the dark
- Joined
- Feb 26, 2015
- Posts
- 8,244
- Reaction score
- 11,646
Maybe something like 4wd and 2wd have different measurements?
pnwdan
Cunning linguist
The trucks are all the same.
05Single
afraid of the dark
- Joined
- Feb 26, 2015
- Posts
- 8,244
- Reaction score
- 11,646
I figured cause when I look for parts I never see an option. Just wonder maybe the frame cross member and oil pan might be different as it is on other brand trucks. So theres no reason why those shouldn't fit
Last edited:
pnwdan
Cunning linguist
The only things that I'm aware of that can vary is the transmission pan. Everything else should be identical.
2003FatSo
Member
- Joined
- Apr 12, 2016
- Posts
- 59
- Reaction score
- 107
Switched out those old, rusty spark plugs and wires.
Feels like a cleaner drive.
Also trimmed the driver side wheel cover to fit the new tires. Was rubbing at full turn.
Feels like a cleaner drive.
Also trimmed the driver side wheel cover to fit the new tires. Was rubbing at full turn.
Last edited:
05Single
afraid of the dark
- Joined
- Feb 26, 2015
- Posts
- 8,244
- Reaction score
- 11,646
Yea also transmission and transfer case might bolt up to a different cross member. But like I said I've looked at headers and don't think I ever seen a 4wd or 2wd option.
05Single
afraid of the dark
- Joined
- Feb 26, 2015
- Posts
- 8,244
- Reaction score
- 11,646
Damn those old ones the originals ? lol I bet you can feel the difference for sure
2003FatSo
Member
- Joined
- Apr 12, 2016
- Posts
- 59
- Reaction score
- 107
Yea they were fugly
Tonyrodz
Resident Resident
According to their site, fits 2 and 4wd trucks. I'm always the oddball!
Patriot17763
Full Access Member
- Joined
- Jul 30, 2016
- Posts
- 101
- Reaction score
- 70
Bath and some design work on my front skid plate.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Cattivo
Full Access Member
Worked on the hoe all day...replaced a faulty coil, cleaned maf sensor, did antenna delete and replaced license plate lights with some new led's
Tonyrodz
Resident Resident
Did you tuck the antenna along the fender under the Hood? Now you gotta fill that hole or grab an escalade cowl piece.
Did you finally get it running right?
Cattivo
Full Access Member
I had zero reception on the stock radio, the previous owner(butcher) created an electrical nightmare i'm still sorting out...i actually had a spare antenna laying around which i had to solder onto the existing antenna wire which was cut and spliced 3 times!
I wound up mounting it under the front cowl and using the entire truck frame as an antenna...so far so good
The cowl piece is the least of my concerns right now, i'll eventually fix that lol...i need to re wire the engine cooling fans onto a rocker switch asap. The butcher hardwired the fans using a piece of 14awg wire into the fuse box under the fuel pump fuse! the fans are constantly running and the wire keeps arching
Cattivo
Full Access Member
Last edited:
DDenali
Full Access Member
Got damn I hate when someone butchers wiring you can correct that though budI had zero reception on the stock radio, the previous owner(butcher) created an electrical nightmare i'm still sorting out...i actually had a spare antenna laying around which i had to solder onto the existing antenna wire which was cut and spliced 3 times!
I wound up mounting it under the front cowl and using the entire truck frame as an antenna...so far so good
The cowl piece is the least of my concerns right now, i'll eventually fix that lol...i need to re wire the engine cooling fans onto a rocker switch asap. The butcher hardwired the fans using a piece of 14awg wire into the fuse box under the fuel pump fuse! the fans are constantly running and the wire keeps arching
Sent from my iPhone using Tapatalk
Similar threads
