Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Don't know how you went that long. I couldn't figure out WTF happened to my cruise when I did my lights last year, and had to fix it ASAP! I even had a resistor burn out this weekend and had to change it out to get rid of the Ricer Flash and get my cruise back.Finally wired the resistors into my LED tail lights. 9 months without Cruise Control was wayyyy too long.
Hell, no recovery equipment needed. It drove great, awesome traction. Why did you call my truck a pig anyway? But it was definitely fun. Got some looks for sure.
I guess they are pretty big pigs huh? Haha, funny shit. It was definitely fun and got some looks.Ah I didn't mean anything negative by it. I lovingly call my XL a pig, or a bus. Bet it was fun!
Where do you guys get your resistors from? I need a few. Do they sell them in stores?Finally wired the resistors into my LED tail lights. 9 months without Cruise Control was wayyyy too long.
Where do you guys get your resistors from? I need a few. Do they sell them in stores?
I ordered mine from amazon. $4.98 shipped for both (50W 6 ohm)Where do you guys get your resistors from? I need a few. Do they sell them in stores?
iJDMTOY 50W 6-Ohm Load Resistors For LED Turn Signal Light Bulbs Solve Fix Hyper Rapid Flash https://www.amazon.com/dp/B00FDX6YAE/ref=cm_sw_r_other_apa_xtaOxbMMTM4TQIs there a specific resistor to use for the tail lights ? Ohms ? Or will any one work? My tails flash too fast and of course no cruise. Thx in advance.
Thx, I'm going to check it out.iJDMTOY 50W 6-Ohm Load Resistors For LED Turn Signal Light Bulbs Solve Fix Hyper Rapid Flash https://www.amazon.com/dp/B00FDX6YAE/ref=cm_sw_r_other_apa_xtaOxbMMTM4TQ
Pretty sure Auto Zone, O'Really, or Advanced should have them too. At least all 3 here have them on the shelf. Or other option is to buy an led flasher. That's what I did and no problems so far.
Sent from my SM-N920V using Tapatalk
Yep I got mine at O'Rellly or Autozone, don't remember which.Thx, I'm going to check it out.
I'll get some pics from a ways back tomorrow, been a busy day today and now it's dark!I can't wait till I do this upgrade !!! Any far away pics? Should fill up that area nicely behind those big shoes.
Installed the rear stainless steel brake hoses but I admit I did not do the one that goes from the differential to the body; I couldn't see any way to get to the top fitting that's above the spare tire mount. @05Single here's a couple of pictures of the GMT900 brake upgrade from back a ways. And a shot of the rear hoses because we all know "if there's no pictures, it didn't happen" lol.I can't wait till I do this upgrade !!! Any far away pics? Should fill up that area nicely behind those big shoes.
Where you pick up that tray from ?Got a few things done this weekend. Removed and reinstalled my driver's side LED fog light. When I installed it back in April I ran the power wire through the same hole as the mounting bolt and as a result it was slightly crooked. Drove my crazy but I knew that in order to fix it I'd have to unbolt it, pull the wiring apart, drill a hole for the wire and then reassemble, but I finally had the time to do it. Looks much better I think.
Before:
![]()
After:
![]()
Looks much better I think.
Other weekend projects: Installed the battery tray for the 2nd battery:
![]()
I've got most of the other parts I need minus the battery and the cables. Will work on that next week.
Also had the tires removed from the wheels I bought in March. Tried to clean up the wheels but they're still pretty yellowed.
Where you pick up that tray from ?