Torque settings for brake, wheel bearing and driveshafts

[High_Country]

I want to install the Brembo brake kit on my 2023 Tahoe.

At the moment I cannot find the torque settings for this project in the www.
It looks like there is no installation manual for this kit online.

This would be fine for the repair of brake parts of the "standard" system too.

I would like to know these torques:

Front axle:
- the driveshaft nut
- the 4 wheel bearing screws
- 2 screws caliper to knuckle (maybe different torques for the standard and the Brembo calipers)

Rear axle
- 2 screws caliper holder to knuckle
- 2 caliper guide pin screws

Is there a way to find these torque settings easy online (without registration and costs)?

 

[Big Mama]

Welcome to the forum from Virginia.
This is from an older rig but may get you in the ballpark. Some of the folks with a bit more knowledge than me will chime in.

Front Axle Nut Size & Torque Spec?

I'm replacing the front hub/bearing assy's on my '96 Tahoe 4x4. Does anyone know what size the axle nut is? I also need to know the torque values for axle nuts and hub mounting bolts. A link providing this info would be greatly appreciated. Thank you!

www.tahoeyukonforum.com

 

[High_Country]

My Thaoe friends,
could someone tell me the wanted torque specs please?
I want to install the Brembos in the next days....
SO PLEASE HELP ME
PLEASE

 

[Big Mama]

Found a few articles on Reddit showing 60 ft pounds for mounting bolts nd 20-25 for guide pins.