The KidWagon

[CMoore711]

That’s coming out of your door?!?! Ahh man… That’s a lot of water.

 

[KidWgn]

That’s coming out of your door?!?! Ahh man… That’s a lot of water.

Yes, yes it is

Gonna try blowing it out later today, assuming the drain hole is clogged. Guessing it’s time for new window seals/sweeps

 

[CMoore711]

Good luck man…. I have found that a few of those type parts have been discontinued on the GMT900 Escalade models.

It’s an unfortunate practice of GM.

 

[CMoore711]

I like the idea and design of these Trekline rear swaybar end links a lot better than the DJM bent design.

It doesn’t look like Trekline offers them by themselves and they are only available with the 5” Rear drop kit…

 

[KidWgn]

I like the idea and design of these Trekline rear swaybar end links a lot better than the DJM bent design.

View attachment 456560

It doesn’t look like Trekline offers them by themselves and they are only available with the 5” Rear drop kit…

Where ya located? I'm using the Hellwigs and they seem to be working out without hitting anything.

 

[CMoore711]

Where ya located? I'm using the Hellwigs and they seem to be working out without hitting anything.

I'm in Dayton, OH area. You installed the Hellwig endlinks in lieu of the Trekline ones?

But do you have the Hellwigs installed with the same offset sleeve mount hardware (circled in red) as the Trekline’s were installed?

Or do you just have the Hellwig end links installed normally? With no sway bar interference ?

 

[KidWgn]

I'm in Dayton, OH area. You installed the Hellwig endlinks in lieu of the Trekline ones?

View attachment 456576

But do you have the Hellwigs installed with the same offset sleeve mount hardware (circled in red) as the Trekline’s were installed?

Or do you just have the Hellwig end links installed normally? With no sway bar interference ?

I just installed them the normal way, on the full-stiff setting.

I do indeed still have the hardware and the spacer sleeve for the Trekline links.