The Case for the Tech-2

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

xDan

Member
Joined
Nov 3, 2017
Posts
89
Reaction score
40
My Tech 2 came in today! I bought from this ebay listing. It only took 12 days to get here via DHL. They listed it for customs at $50 USD and DHL charged me $24. It came with everything as far as I'm aware. I've got to figure out how to run it in its loopback mode.
 

shreksbrother

Full Access Member
Joined
May 9, 2017
Posts
324
Reaction score
290
Location
Auburn Hills, MI
My Tech 2 came in today! I bought from this ebay listing. It only took 12 days to get here via DHL. They listed it for customs at $50 USD and DHL charged me $24. It came with everything as far as I'm aware. I've got to figure out how to run it in its loopback mode.
Mine arrived on Monday. I didn't get any type of extra charges, though!

Sent from my Galaxy Note9 using Tapatalk
 
OP
OP
swathdiver

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
21,321
Reaction score
30,315
Location
Treasure Coast, Florida
My Tech 2 came in today! I bought from this ebay listing. It only took 12 days to get here via DHL. They listed it for customs at $50 USD and DHL charged me $24. It came with everything as far as I'm aware. I've got to figure out how to run it in its loopback mode.

Canada?
 
OP
OP
swathdiver

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
21,321
Reaction score
30,315
Location
Treasure Coast, Florida
I wonder if I can read all the Hybrid battery data (temps/voltages/cooling fan speed etc) with one of these Tech2 scan tools as it comes from this manufacturer? If I knew it would work for that I would order one straight away.......
http://www.chinacardiags.com/wholes...or-gm-saab-opel-suzuki-isuzu-holden-1011.html

I'm sure it can. One of these days I'll get to meet up with @RebelBelle in person and see on his Hybrid. We still have to get his keys programmed to his other car but he's been quite busy.
 

Nash

TYF Newbie
Joined
Aug 11, 2017
Posts
21
Reaction score
6
I purchased a Tech 2 from chinacardiags.com and it came with a 1" wide line all the way down the screen which made it impossible to read all the display. I contacted the seller and advised them of the problem and wanted the Tech 2 replaced. They wanted a picture of the screen and I sent them copies. Since then they have quit responding to my emails. You are sol if you receive a bad Tech 2 from these people.
 

14rcsbOH

Full Access Member
Joined
Oct 15, 2018
Posts
213
Reaction score
296
Location
Ohio
Can you activate things like added on remote start and backup cameras with these things?
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
33,328
Reaction score
51,796
Location
Central Jersey
I purchased a Tech 2 from chinacardiags.com and it came with a 1" wide line all the way down the screen which made it impossible to read all the display. I contacted the seller and advised them of the problem and wanted the Tech 2 replaced. They wanted a picture of the screen and I sent them copies. Since then they have quit responding to my emails. You are sol if you receive a bad Tech 2 from these people.
That sux.
 

Nash

TYF Newbie
Joined
Aug 11, 2017
Posts
21
Reaction score
6
That sux.
The out of the box inspection of the Tech 2 was not what I wanted to see. The screen did not come with the plastic covering and the screen had a big scratch in it . The back of the Tech 2 had multiple scratches and below where the PCMCIA card goes in there was another scratch.
I suspect it was a refurbished unit. I get the final surprise when the unit was powered up.
 
Last edited:
OP
OP
swathdiver

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
21,321
Reaction score
30,315
Location
Treasure Coast, Florida
I purchased a Tech 2 from chinacardiags.com and it came with a 1" wide line all the way down the screen which made it impossible to read all the display. I contacted the seller and advised them of the problem and wanted the Tech 2 replaced. They wanted a picture of the screen and I sent them copies. Since then they have quit responding to my emails. You are sol if you receive a bad Tech 2 from these people.

I had an issue with mine in the beginning and at times thought I was in the same position as you. But I was patient and kept at it and they responded appropriately albeit slowly. Sorry to hear about this btw.

Can you activate things like added on remote start and backup cameras with these things?

Yes, however, it's not flipping a switch. The Tech-2 would have to connect to a laptop (Win XP or Win7) which would access the programming from Tis2Web and then transfer it to the vehicle via the Tech-2. Others on here have done this, I have not yet.
 

Bear77

Full Access Member
Joined
Aug 9, 2017
Posts
557
Reaction score
756
Location
South FL
Yes, however, it's not flipping a switch. The Tech-2 would have to connect to a laptop (Win XP or Win7) which would access the programming from Tis2Web and then transfer it to the vehicle via the Tech-2. Others on here have done this, I have not yet.

Do you happen to know if it’s only on the 900’s or can the 800’s too?


Sent from my iPhone using Tapatalk
 
OP
OP
swathdiver

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
21,321
Reaction score
30,315
Location
Treasure Coast, Florida
Do you happen to know if it’s only on the 900’s or can the 800’s too?


Sent from my iPhone using Tapatalk

I think all the 2008 and earlier vehicles are included with the TIS2000 software. @Rocket Man might now. I seem to remember someone programming their truck from TIS2000 without having to go online in recent months.
 

CountryBoy19

Full Access Member
Joined
Jun 8, 2018
Posts
265
Reaction score
150
Location
Southern Indiana
I had an issue with mine in the beginning and at times thought I was in the same position as you. But I was patient and kept at it and they responded appropriately albeit slowly. Sorry to hear about this btw.



Yes, however, it's not flipping a switch. The Tech-2 would have to connect to a laptop (Win XP or Win7) which would access the programming from Tis2Web and then transfer it to the vehicle via the Tech-2. Others on here have done this, I have not yet.
Just to note, some things are "flipping a switch"...

IE, turning on HVAC afterblow, enabling TPMS or Spare-tire TPMS etc.

Adding a camera on a newer model year would probably involve more in-depth changes that require TISweb
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,679
Reaction score
52,954
Location
Oregon
Just to note, some things are "flipping a switch"...

IE, turning on HVAC afterblow, enabling TPMS or Spare-tire TPMS etc.

Adding a camera on a newer model year would probably involve more in-depth changes that require TISweb
TPMS is always enabled- try to disable it lol. Can’t. As far as TISWeb though, I never got that far. The TIS 2000 software kicked my ass.
 

trailblazer

Full Access Member
Joined
Jan 22, 2019
Posts
302
Reaction score
417
It’s TIS2web now.

You don’t have to install anything. Just log into acdelcotds.com It costs $40 per VIN for 24 months access for calibration updates. Useful for the notorious P2135 repair.

It’s all Java based and you use the Tech 2 as a J2534 pass-thru device. The standalone Tech 2 will always be priceless for our 2013 and earlier models though. Otherwise plan on also getting an MDI-2 clone too. GM, like its competitors, have made everyone access their software via the cloud.

Look at Microsoft Office. They switched to the subscription model just like almost every other software firm. The automotive companies have followed suit.




Sent from my iPhone using Tapatalk
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,679
Reaction score
52,954
Location
Oregon
It’s TIS2web now.

You don’t have to install anything. Just log into acdelcotds.com It costs $40 per VIN for 24 months access for calibration updates. Useful for the notorious P2135 repair.

It’s all Java based and you use the Tech 2 as a J2534 pass-thru device. The standalone Tech 2 will always be priceless for our 2013 and earlier models though. Otherwise plan on also getting an MDI-2 clone too. GM, like its competitors, have made everyone access their software via the cloud.

Look at Microsoft Office. They switched to the subscription model just like almost every other software firm. The automotive companies have followed suit.




Sent from my iPhone using Tapatalk
It says you have 24 months to program all the modules in the vehicle one time? That’s it?
 

Chrismnj

Full Access Member
Joined
Sep 17, 2015
Posts
1,227
Reaction score
2,121
Location
NJ
not to hijack the post but I have purchased iCarsoft ProII for my Porsche with software for it, just to reset oil light reminder (can't justify almost $400 in oil change). Do you guys think if it's possible to upload another file for GM vehicle? Does anyone has any experience with this device?
 

Forum statistics

Threads
138,047
Posts
1,997,835
Members
102,984
Latest member
TexasTaz
Back
Top