Spohn Performance 450.00

[BLKCaddy]

Im selling my "Upper/Lower and Panhard Bars" I didnt wash them after getting them from the shop because i dont know if i should power wash them. I have bolts and everything is included in the pictures.

If you want me to Power wash them, i can no extra fees but i just want your ok before doing so.

I dont want to say s/h will be included because i dont want to get stiffed on the price, please understand and i have a box and they will be wrapped separately just to ashore they arrive in the great condition they are in already.

AND NO THEY ARE NOT BENT OR NOTHING AGGRESSIVELY HAS BEEN DONE TO THEM!!!

Sorry forgot to add but I'm sure some of you can guess for what yr and body these are for but i list it just to make sure.

01-06 Yukon, Tahoe 2WD and im not sure if these will work on the XLT models but idk

ok, if people want me to part things out! don't low ball me please! My truck has sat or either went to shows or sat in my garage for months, MONTHS!!! they are in great condition with nothing missing or bent and i even got the bolts from spohn so you get everything! plug and play! bushings are still in great condition. I took pics so it was easy to show there was nothing to hide and to show how they look once the shop took them off and handed them to me. the "spohn performance" tags are still on them lol

 

[Blazed]

Why are you selling?


Sent from my iPhone using Tapatalk 2

 

[yates ™]

Why couldn't you power wash them?

 

[BLKCaddy]

Everything will be cut up and redone so i dont need these

---------- Post added at 04:22 PM ---------- Previous post was at 04:18 PM ----------

I guess i don't want to make a mistake of doing something so id rather have people see them for how they look and not think I'm hiding something

 

[digitalfiend]

Dont need them anymore

You returning your Tahoe to stock?

 

[BLKCaddy]

no its in the shop getting redone and cut up and no turning back lol i have a build album on my profile

 

[dropmech]

Willing to part? I have a pan hard bar already. How long were they used? How are the bushings?

 

[BLKCaddy]

The bushings are in great condition, the pics were taken just yesterday and i left them as is to show how they look and how well kept they are and no damage or anything! If i part with the uppers and lowers i dont want to be low balled because pretty much my truck was used for shows and a weekend drive here and there before it went in to the shop. It spent most of the time sitting in my garage for months. no long trips, no heavy duty driving even though thats what these can be used for! They were just for performance and show use!!!

 

[dropmech]

How's $300 shipped for the uppers and lowers?

 

[digitalfiend]

How's $300 shipped for the uppers and lowers?

I sent the mod a private message within the first hour of this thread getting started offering to buy the panhard bar, but he wanted to keep the parts together...makes sense so that he's not left with bits and pieces after one or two of the parts are bought. Maybe now that he has an offer on the table from you for the bars he may be interested in parting out the pieces between us.

Unfortunately, I may have triggered his "no lowballer" update with my offer the panhard bar by bidding beneath his comfort zone.

So let's try this again...I'll give you $100 shipped for the panhard to 78253.

 

[dropmech]

I would think $100 shipped for a used bar is acceptable seeing as how a brand new one is $135 shipped from Tony.

 

[digitalfiend]

I would think $100 shipped for a used bar is acceptable seeing as how a brand new one is $135 shipped from Tony.

I concur with you. Though, to be fair, $100 wasn't my initial offer. Sometimes offering low and then expecting the seller to counter slightly higher can backfire by upsetting the seller. Heck, I'm selling parts right now from my last ride and I got offered $300 on a $2000 component...it did irk me just a little bit, so I can understand to a degree.

Anyways...I'm hoping the mod accepts our combined wonder powers because this would be one less thing on my long list of mods to get done.

 

[BLKCaddy]

I'm glad you understand, it just leaves a bad taste in your mouth and then with the s&h can very from place to place so it just irks, like you said lol

---------- Post added at 12:09 PM ---------- Previous post was at 12:08 PM ----------

Ok the bars lol pm me your zip so I can find out about s&h

---------- Post added at 12:13 PM ---------- Previous post was at 12:09 PM ----------

And btw, the panhard bar doesn't have a "key" I only got one because I only needed one but I'm sure if you already have spohn uppers and lowers you might have a key and I ordered mine in BLK not red, just FYI

 

[dropmech]

What key are you talking about?

 

[digitalfiend]

What key are you talking about?

Do you have an adjustment key for your spohn panhard?

If you don't have a key, how did you tune it when you installed it?

 

[dropmech]

I think I have a newer version? Mine is adjusted with a wrench after loosening two jam nuts. Just crawl under and adjust it. I take a ruler to measure the wheel after adjustment.

 

[digitalfiend]

And btw, the panhard bar doesn't have a "key" I only got one because I only needed one but I'm sure if you already have spohn uppers and lowers you might have a key and I ordered mine in BLK not red, just FYI

Is the key that you're referring to required to adjust both control arms and the panhard bar?

 

[BLKCaddy]

Go to this page http://www.spohn.net/shop/2000-2006...Tahoe-Yukon-Avalanche-Escalade-Hummer-H2.html

And it's * Del-Sphere Adjustment Tool:

I only got one

 

[digitalfiend]

Go to this page http://www.spohn.net/shop/2000-2006...Tahoe-Yukon-Avalanche-Escalade-Hummer-H2.html

And it's * Del-Sphere Adjustment Tool:

I only got one

Now I see what you're talking about, thank you for slowing the bus down for me. One of us needs that tool...and my opinion is that it should be included with the control arms. If dropmech doesn't want it then I'd be happy to take it off your hands. Depending upon who gets it, would it be included with the prices that we've been discussing?

And by the way, are we doing this deal or what!?

 

[dropmech]

It's gonna be a while before I install these arms, so I can pick up the tool on my own later on if you want it.