Rear tires rub with 24s.

[Murderedouthoe]

I have 24s on my 07 tahoe and every once in a while when i go over bumps or around tight corners they rub the inner fender. I have cut a little where it rubs but i dont want to tear the whole thing up. Does anyone have any other suggestions?

 

[road1will]

Lift it

 

[Murderedouthoe]

no thanks, that would look horrible. Its already to high as it is.

 

[jmildoc]

looks really high now how does it rub?

 

[Nickleahy23]

mine rubbed in back as well...give it a week or 2 they will rub the plastic enough to where it doesnt make any sound..it wont hurt anything either

 

[road1will]

no thanks, that would look horrible. Its already to high as it is.

It was a joke.

 

[Conor]

What is your offset on the wheels. If anything should rub, it would be the fronts. My Momo's rubbed a little in the front of my Escalade and I had to cut some of the fender liner out.

 

[Murderedouthoe]

Im pretty sure its a 40mm offset, It only rubs when the shocks compress. Like when im towing a boat so it would take a while for it to wear down.

 

[road1will]

Is it when just one wheel compresses or both?

 

[BOSS]

I would space the wheels out, start with 1/4in. and see how it goes. Doesn't sound like you need much. My rears are 1/2in. spaced out and made a big difference...problem is I already cut out alot of plastic and now I gotta go buy a new set.


BOSS

 

[DwDrummer]

If you have the Boss 330's in 24's you have a +30mm offset, I have the same wheels!

 

[road1will]

If you have the Boss 330's in 24's you have a +30mm offset, I have the same wheels!

You can get wheels in different offsets.

 

[Murderedouthoe]

No they are 313s, and i have thought about spacers i dont even think i would need 1/4 inch. It barely hits, just enough to make noise.

 

[Nickleahy23]

its not that big of a deal..i mean ya it sounds annoying as hell..but mine went away after a week..worst case pop the wheels off and trim exactly where its hitting

 

[Murderedouthoe]

ya, really annoying. Thanks

 

[DwDrummer]

You can get wheels in different offsets.

This I know but for the this particular style ( Boss 330 ) wheel it's available in only +12 and +30m for 24x10 in the 6x5.5 bolt pattern. The 313 was offered in a +40mm.

 

[Murderedouthoe]

the boss 313s come in a +12 and +40 offset in the 6x5.5. Thats why i said i thought it was a +40.